DJ-X11

DJ-X11

DJ-X11

Product catalog summary
Overview: The DJ-X11 is a wide band communications receiver designed for multi-mode reception across a broad frequency range of 0.05 to 1,299.99995 MHz. It features a large illuminated keypad and screen for ease of use, and supports PC-friendly signal outputs including IQ and detection circuits.
Key Features:
  • Patented ChannelScope for monitoring nearby frequencies.
  • Receives short-wave signals with an external antenna.
  • Equipped with a long-lasting 1800mAh Li-Ion battery pack.
  • Rugged polycarbonate body with rubber protectors and a quick-release belt clip.
  • Optional ERW-8 for clone-utility and real-time control software.
  • 2VFO simultaneous RX with main-band coverage in all modes and sub-band coverage in VHF and UHF.
  • 1200 memory channels with adjustable memory banks.
  • IQ signal and IF output for software-defined radio capabilities.
Specifications:
  • Dimensions: 61 (W) x 106 (H) x 38 (D) mm.
  • Weight: Approx. 235g including antenna and battery.
  • Frequency stability: -7 to +3 ppm.
  • Temperature range: -10 to +60℃.
  • Current consumption: Approx. 130mA Monoband / 180mA Dualband.
  • Supply voltage: DC 3.7V (EBP-74) / DC 4.5V (EDH-33).
  • Audio output power: More than 100mW (8ohm 10% THD).
Operational Modes: The receiver supports AM, FM, WFM, SSB, and CW modes, with selectable tuning steps and various scan modes including preset, programmed, memory, VFO, and tone scan.
Accessories: Standard accessories include a whip antenna, Li-Ion battery pack, belt clip, hand strap, drop-in charger kit, and dry cell case. Optional accessories include various adapters, remote controllers, earphones, and a soft case.
Additional Information: The device is designed with a frequency counter, flash tune, and a 'bug detector' function for hidden transmitter searches. It also features a clone function and supports wire remote-control using optional accessories.
Note: Specifications are subject to change without notice. Certain frequencies are blocked on models sold in specific regions, and restrictions may apply to receiving certain communications.
See more

Catalog excerpts

DJ-X11-1

0.05∼1,299.99995MHz All Mode Wide Band Communications Receiver DJ-X11 2VFO simultaneous RX Main-band coverage: 0.05∼1,299.99995MHz all mode AM/FM/WFM/SSB/CW (BFO receive, not filtered) Receives short-wave! (An external antenna required for practical monitoring.) SMA antenna connector Sub-band coverage: VHF:118∼171MHz/UHF:336∼ 470MHz in AM/NFM 1200 memory channels with adjustable memory banks IQ signal and IF output features: DJ-X11 has an IQ signal output that can be used with 3rd-party software Receives short-wave (freeware) to operate as a software defined radio. 10.7MHz IF signals can be used with other receiverrelated software available on the internet. Quick-release belt clip Alinco’ patented ChannelScope s checks signals on nearby frequencies for both bands User-friendly icons Easy-to-use twin dial operation Large illuminated keypad & screen for easy operations Optional ERW-8 enables the use of both clone-utility AND real-time control software. Large function & monitor keys Long-lasting 1800mAh Li-Ion battery pack PC-friendly signal outputs including IQ and detection circuit. Internal bar-antenna Rugged poly-carbonate body with rubber

 Open the catalog to page 1
DJ-X11-2

WIDE BAND COMMUNICATIONS RECEIVER Restrictions may apply to receive communications such as public-safety, air-band etc. in some countries. Please consult with the local authority before operating these products. Cellular frequencies blocked on T model sold in USA, unblocked model available in Canada and for authorized US users with proper documentation. Listen to the world with this pocket-size multi-mode receiver! Features Receives FM/WFM/AM/SSB/CW using SMA antenna with internal bar antenna for AM broadcast band reception Pocket size unit measures 61 (W) x 106 (H) x 38 (D) mm / 2.4 (W) x 4.17...

 Open the catalog to page 2

All Alinco catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.