*myaeroexpo

PRECISION FORM

1 / 2 PagesView full catalog

PRECISION FORM

Product catalog summary

Specifications:

End Diameter: Ranges from 65 mm to 153 mm with corresponding values provided.
Material Thickness: Varies from 0.14 mm to 0.22 mm, with specific weight indications.
Buckle Pressure: Values range from 1.5 bar to 2.9 bar, with a note that these are 50% higher than accepted internal can pressures at 50°C.

Procedures:

Precision Form Process: No thinning occurs, unlike the conventional process which involves thinning.
Downgauging: Applied to sanitary ends and aerosol bottoms using DR plate, offering up to 25% and 20% savings respectively.

Material Specifications:

Material Thickness for DR Plate: Options include 0.24 mm, 0.26 mm, and 0.28 mm.
Buckle and Burst Pressure for DR Plate: Buckle pressure ranges from 13 to 18 bar, while burst pressure ranges from 15 to 20 bar.

Contact Information:

Company: Alfons Haar Maschinenbau GmbH & Co. KG
Address: Fangdieckstrasse 67, D-22547 Hamburg
Phone: +49 40 83391-0
Fax: +49 40 844910
Website: www.alfons-haar.de
Email: [email protected]

Catalog excerpts

PRECISION FORM Downgauging of sanitary ends using DR plate before bottom dead center bottom dead center Conventional Process - thinnning Precision Form Process - no thinnning

Open the catalog to page 1

AEROSOL BOTTOMS titans Haar Downgauging of pressure can bottoms using DR plateMATERIAL BUCKLE BURSTTHICKNESS PRESSURE PRESSURE in mm in bar in bar Remark: buckle pressure values are 50% higher than the accepted pressure values inside the cans at 50°C ALFONS HAAR MASCHINENBAU GMBH & CO. KG • Fangdieckstrasse 67 • D-22547 Hamburg • TEL +49 40 83391-0 • FAX +49 40 844910 INTERNET www.alfons-haar.de ♦ E-MAIL [email protected] 2266872.2 Subject to alteration

Open the catalog to page 2

PRECISION FORM

PRECISION FORM

Catalog excerpts

All ALFONS HAAR MASCHINENBAU GMBH & CO. KG catalogs and technical brochures