- Catalogs
- ALFONS HAAR MASCHINENBAU GMBH & CO. KG
- CNC - DF/AF - P35 (d) SHEET FEED PRESS
CNC - DF/AF - P35 (d) SHEET FEED PRESS
CNC - DF/AF - P35 (d) SHEET FEED PRESS
- 100% automation for efficiency.
- Material savings through precise feed mechanisms.
- Manpower savings by eliminating strip shearing with direct sheet processing.
- Short changeover times for increased flexibility.
- Hydraulic overload safety device for protection.
- Preloaded, play-free roller ram guidance for precision.
- AC main drive with static frequency converter and electrical flywheel brake for control.
- Main motor-driven slow motion for the ram.
- Die alignment system with electronic control.
- Optional quick die change system for efficiency.
- Type: CNC -DF/AF - P35 (d)
- Capacity: 35 t
- Stroke Length: 120 mm
- Speed Max: 260 rpm
- Power: 7.5 kW
- Blank Diameter: 200 mm
- Draw Depth: 25 mm (0.984 inch)
- Sheet Size Max: 1150 x 1000 mm (45 x 39 inch)
- Material: Scrolled and unscrolled sheets (0.1 - 0.5 mm), Aluminum, Tinplate, DR-TFS
- Output: Cans up to 520 cpm (4-out), Ends up to 1800 cpm (8-out)
- Quick Change: Less than 1 hour including tool change
- Air Supply: 6 bar
- Height: 3.1 m
- Standardized HRS design with modular components for a complete system.
- PreciCONTROL architecture reduces wiring and enhances safety with menu-based control terminals.
- Reliable and service-friendly due to the use of modern components in modular construction.
Catalog excerpts
CNC-DF/AF-P35(d) SHEET FEED PRESS titans Haar • Highly flexible press center • 100% automation • Material savings by utmost precision feed • Manpower savings by direct sheet processing eliminating strip shearing • Flexibility by shortest changeover times • Hydraulic overload safety device • Preloaded, playfree roller ram guidance • AC-maindrive with static frequency converter • Electrical flywheel brake • Main motor driven slow motion for the ram • Die alignment system with electronic control Optional: Quick die change system
Open the catalog to page 1
>4lfons Hoar TECHNICAL DATA TYPE: CAPACITY: STROKE LENGTH: SPEED MAX: DIES: POWER: BLANK DIAMETER: DRAW DEPTH: SHEET SIZE MAX: Material • Scrolled and unscrolled sheets 0,1 - 0,5 mm/.004"- .02" • Aluminum • Tinplate • DR-TFS Output • Cans up to 520 cpm (4-out) • Ends up to 1800 cpm (8-out) Quick Change • < 1 hour incl. tool change Reliable & Service friendly by uncompromising use of up-to-date-components in modular construction. TYPE DF with Linear Motor Technology ALFONS HAAR MASCHINENBAU GMBH & CO. KG • Fangdieckstrasse 67 • D-22547 Hamburg • TEL +49 40 83391-0 • FAX +49 40 844910 INTERNET...
Open the catalog to page 2All ALFONS HAAR MASCHINENBAU GMBH & CO. KG catalogs and technical brochures
APPLICATIONS AND LINES2 Pages
PRECISION FORM2 Pages
HIFR Assembly2 Pages
MKA VANE METER2 Pages
Helicopter Refuelling System3 Pages
