Aerowave® Filler 2501
1 / 4Pages

AkzoNobel Aerospace Coatings Product Group Composite Coatings / Primer Surfacer Aerowave® Filler 2501 is a low VOC, shrinkage free, 2-component stopper for several substrate types. Product Information Fast curing at ambient conditions Low VOC emission Compatible with a wide range of composite, plastic, metallic substrates and primers Does not shrink or swell during application and curing Remains flexible after curing Low odor level Low dry-film-weight (DFW); reduce operational costs Aerowave® Filler is 2501 a product part of the Aerowave® Series which utilizes the latest resin technology and sets the standard for minimum process times, reduced process cycle costs and environmental care. Components Hardener Thinner or Activator Qualified Product List Gulfstream Aerospace For most recent up-date or missing specifications please check the qualified product list (QPL) on www.akzonobel.com/aerospace AkzoNobel Aerospace Coatings 1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200 Rijksstraatweg 31, 2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056 Internet: www.akzonobel.com/aerospa

AkzoNobel Aerospace Coatings Surface Conditions Aerowave® Filler 2501 can be applied directly on composite substrate or primer. If applied over metallic substrates, assure the metallic substrate is primed with the applicable primer. Aerowave Filler 2501 is compatible with most commonly used primers, e.g.: Aerowave 2002 Aerodur Barrier Primer 37045 Aviox CF Primer 37124 Assure that release agents are removed from the composite substrate prior to further surface pretreatments. Sand composite panels to a uniform matt surface and blow panels dust free with pressured air. Degrease surface with...

AkzoNobel Aerospace Coatings Aerowave® Filler 2501 may be applied in conditions outside of the the limits shown above. Care must be excercised to ensure a satisfactory result. Please contact your local AkzoNobel Aerospace Coatings representative to determine the proper application techniques when environmental conditions fall outside of the recommended range. Filling knife / spatula Fill surface flaws, cracks and holes in one coat using the spatula. Aerowave® Filler 2501 does not shrink or swell. The stopper should be completely dry before sanding. The stopper must be sanded back to the...

AkzoNobel Aerospace Coatings Aerowave® Filler 2501 Curing Solution 6009 Store the product dry and at a temperature between 5 and 25ºC / 41 and 77ºF. Stored in the original unopened containers. Periodical short time exposure (max. 48 hrs at a time) to higher temperatures (max. 40oC / 104oF) will not negatively influence the shelf life of the products. Safety Precautions Aerowave® Filler 2501 Curing Solution 6009 Comply with all local safety, disposal and transportation regulations. Check the Material Safety Data Sheet (MSDS) and label of the individual products carefully before using the...