Aerodur 3001 Base Coat
6Pages

AkzoNobel Aerospace Coatings AkzoNobeMLy^ Aerodur 3001 Base Coat Special Effects Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 Special Effects topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors - Aerodur 3001 Special Effects - Aerodur 3002 Clear Coat system for exterior usage. This system provides uniform coverage and appearance in one box coat application for most of the colors and effects. When used with the specified polyurethane clear top coat (Aerodur 3002) this system provides a durable long lasting, protective and decorative finish that exceeds typical OEM requirements for exterior aircraft performance. Aerodur 3001 Base Coat Solid Colors - Aerodur 3001 Base Coat Special Effect Colors - Aerodur 3002 Clear Coat (3002G00002 or 3002G00005) provides: - Unique appearance on aircraft livery - Uniform sparkling effect appearance - Excellent gloss / color retention - Opacity at low film thickness - Short tape time - Superior chemical and stain resistance - Low dirt adhesion - Sustainable and cost efficient Components Base Curing Solution Activator AkzoNobel Aerospace Coatings 1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200 Rijksstraatweg 31,2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056 Internet: www.akzonobel.com/aerospace

AkzoNobel Aerospace Coatings AkzoNobeMLy^Aerodur 3001 Base CoatSpecial Effects Specifications Qualified Product List AkzoNobel Aerospace Coatings Certification For most recent up-date or missing specifications please check the qualified product list (QPL) on www.akzonobel.com/aerospace Surface Conditions Recondition aged primers with e.g. Scotch-Brite® Type A very fine prior to application of Aerodur 3001 Base Coat Solid Colors. Aerodur 3001 Base Coat Special Effects is compatible and applied on top of Aerodur 3001 Base Coat Solid Colors. Observe the recoatability times of the previous...

AkzoNobel Aerospace Coatings Aerodur 3001 Base Coat Special Effects Initial Spraying Viscosity 18 − 23 seconds Ford Cup #4 35 − 48 seconds ISO Cup 4 Viscosity measurements are provided as guidelines only and are not to be used as quality control parameters. Certified information is provided by certification documentation available on request. Aerodur 3001 Base Coat Solid Colors only (3001GXXXX) 25 − 45 microns (m) or to complete coverage 1.0 − 1.8 mils or to complete coverage Aerodur 3001 Base Coat Special Effects only (3001EXXXX) 20 − 30 microns (m) 0.8 − 1.2 mils Application...

AkzoNobel Aerospace Coatings Aerodur 3001 Base Coat Special Effects Equipment Air HVLP Air spray Electrostatic Airless Electrostatic - 055 −.072 mm nozzle orifice 1.4 − 1.8 mm nozzle orifice 1.4 − 1.8 mm nozzle orifice Not recommended All filters in the application equipment should be removed to avoid clogging. Do not use airless application equipment. Extra attention should be paid when cleaning the equipment Step 1: Aerodur 3001 Base Coat Solid Colors (3001GXXXX) - Observe the recoatability limits of the relevant primer. Apply a homogeneous, wet cross coat to achieve a dry film thickness...

AkzoNobel Aerospace Coatings Aerodur 3001 Base Coat Special Effects Physical Properties Aerodur 3001 Special Effects over Aerodur 3001 Solid Color Recoatable minimum Recoatable maximum Aerodur 3002 Clear Coat over Aerodur 3001 Special Effects Recoatable minimum Recoatable maximum Drying Times Theoretical Coverage 20 − 22 m2 per liter ready to apply at 25 m dry film thickness 810 − 820 ft2 per US gallon ready to apply at 1 mil dry film thickness Volatile Organic AkzoNobel Aerospace Coatings 1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200...

AkzoNobel Aerospace Coatings Aerodur 3001 Base Coat Special Effects Flash-point Store the product dry and at a temperature between 5 and 38ºC / 40 and 100ºF per AkzoNobel Aerospace Coatings specification. Store in the original unopened containers. Storage temperature may vary per OEM specification requirements. Refer to container label for specific storage life information. Shelf life 12 months per AkzoNobel Aerospace Coatings commercial specification. Shelf life may vary due to OEM specification requirements. Refer to container label for specific shelf life information. Safety Precautions...