Aerobase Polyurethane Topcoats
5Pages

AkzoNobel Aerospace Coatings AkzoNobeMLy^AerobaseTechnical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerobase is a 3-component basecoat for use in the base coat - clear coat decoration system for commercial aircraft application to provide uniform coverage and appearance in one coat application for most of the colors. When used with the specified polyurethane clear topcoat, Aviox Clearcoat UVR, this system provides a durable long lasting, protective and decorative finish that exceeds typical OEM requirements for exterior aircraft performance. Aerobase in combination with Aviox Clearcoat UVR provides: - Excellent gloss / color retention - Extended durability and weathering - Opacity at low film thickness - Short tape time - Reduction of process times - Superior chemical and stain resistance - Low dirt adhesion - Excellent cleanliness - Sustainable and cost efficient Aerobase Aerobase Curing Solution Aerobase Standard Activator Components Base material Curing Solution Curing Solution Thinner / Activator Specifications Qualified Product List For most recent up-date or missing specifications please check the qualified product list (QPL) on www.akzonobel.com/aerospace. AkzoNobel Aerospace Coatings 1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200 Rijksstraatweg 31,2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056 Internet: www.akzonobel.com/aerospace

Aerobase Surface Conditions Aerobase is compatible with Aerodur LV 2114, Aerodur HS 2118, Aviox CF Primer 37124 and Aerodur Sealer 42240 along with other epoxy primers. Observe the recoatability times of the previous layer of paint. Apply Aerobase on clean primer, sealer or Aerobase layer. Remove oil, grease and other contamination prior to application. ® Recondition aged primers or topcoats with e.g. Scotch-Brite Type A very fine to a uniform matt surface. Remove dust with e.g. tack rags just prior to application of Aerobase. Instruction for Use Mixing Ratio (volume) 5 parts 1 part 1 part...

Aerobase Note The application and mixing characteristics of High Solid products differ from conventional products. Mix base and hardener for at least 2 minutes thoroughly. The high solid content causes a rapid film build up. Application Recommendations Conditions Temperature: Relative Humidity: Aerobase may be applied in conditions outside of the the limits shown above. Care must be excercised to ensure a satisfactory result. Please contact your local AkzoNobel Aerospace Coatings representative to determine the proper application techniques when environmental conditions fall outside of the...

Aerobase Cleaning of equipment Use Solvent Cleaning C 28/15 or Solvent Cleaning 98068. Because Aerobase is a fast drying base coat, it is important to clean the equipment as soon as possible after completion of the paint job. The quality of the application of all coatings will be influenced by the spray equipment chosen and the temperature, humidity, and air flow of the paint application area. When applying the product for the first time, it is recommended that test panels be prepared in order to identify the best equipment settings to be used in optimizing the performance and appearance of...

Aerobase Curing Solution >21°C /70°F Aerobase Standard Activator <21°C /70°F Store the product dry and at a temperature between 5 and 35°C / 41 and 95°F. Stored in the original unopened containers. Refer to container label for specific storage life information. Safety Precautions Comply with all local safety, disposal and transportation regulations. Check the Material Safety Data Sheet (MSDS) and label of the individual products carefully before using the products. The MSDS’s are available on request. Issue date: July 2015 (supersedes October 2014) - FOR PROFESSIONAL USE ONLY...