Technical Data Sheet for HydraLink® Doors
2Pages

Technical Data Sheet for HydraLink® Doors TYPE OF DOOR: HydraLink® A single panel structural door fabricated with wide flange beams, rectangular tube and built up members. The door system includes track columns and the required hydraulic operator system. The door is operated via a power unit comprising of a pump, motor, and reservoir, which forces hydraulic oil under pressure thru valves, hoses, and hard tubing, connected to a custom pair of hydraulic cylinders. The cylinders are connected to the door panel via the pivot assembly. The flow of the hydraulic fluid will determine if the cylinders are extending to open the door, or retracting to close the door. DOOR INFORMATION Maximum Width: Maximum Height: Door Weight: Power Supply: Steel Specifications: Opening Speed: Operating Temperatures: Hydraulic Cylinders: 160 feet + 32 feet + Varies by requirements, average 6 pounds per square foot . U.L. compliant. 208-v -240 v 25 amps / 12VDC optional. ASTM 992 50 KSI. Varies – see drawings. Adjustable. -20° C/ +70° C 3,000 PSI, welded design for additional safety. FINISHES Door Frame Assembly: AirSide Strut ™: Hydraulic Cylinders: Power Unit: One Shop Coat Grey Primer. Galvanized. Wet Coat AirSide Blue. Powder Coat AirSide Blue. PANELS / TRIMS AND INSULATION Sheathing Panels: Trims: Insulation: Customer to specify and supply. Panel elevations and required door trim details by AirSide. Customer to specify and supply. Customer to specify and supply. WIND LOAD The door is designed to withstand external wind load in accordance with Uniform Building Code design and wind loads specified by the customer’s zip code. DRIVE SYSTEM A single or dual submerged, electric powered, hydraulic pump (s) operates the door. Power unit to be mounted to the floor and connect to the HydraLink® door via supplied hydraulic hoses. Includes a, non-restrictive, high flow, filtering, oil-system, to extend the life of all components. OPERATION CONTROLS Actuation: Up or down push button switch provided. Note: Additional closing safety features are available (I.E. photocell or safety edge). POSITION LOCKING Automatic lock valve, located in the hydraulic cylinder, secures the door in any position. AIRSIDE STRUT ™ For engineering purposes, a built up galvanized AirSide Strut ™, is positioned across the outside of the door at approximately 50% of the elevation. The AirSide Strut ™ elevation will typically allow the placement of a 3’-0” x 7’-0” personnel door. SEALS Seal fitted to the sides and bottom of the door is 1-ply E.P.D.M. rubber, durometer of 60, temperature -20° C/ +70° C.

WARRANTY Structural door framework and fittings: Cylinders: Hydraulic pumps: Extended Warranty Plans: 5 year materials. 5 year materials. 5 year materials. Available upon request. OPTIONAL ACCESSORIES PERSONNEL DOORS Personnel Door: 3’-0” x 7’-0” left or right swing available. Door opens outwards. Single cylinder satin chrome commercial keyed entry lever with metal chassis and 2-keys. WINDOWS AirSide Doors can fabricate just the framework if you prefer to source your own windows and doors. INSIDE SHEATHING AirSide can add additional framing to the inside of the HyrdaLink™ door for customer...