In-pavement Taxiway Edge Light Compliance with Standards ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-46 NATO: STANAG 3316 CAAC: GB-T 7256-2005 TOEL-08 Taxiway Edge Light 8-inch/inset/ omni-directional Lamp Power 048 = 1×48W Beam Color B = Blue Taxiway edge One type of patent prism structure makes excellence performance of optical. High strength of upper cover glass has strong compressive astigmatic ability. The upper cover glasses only 10mm above ground level lower the impact of lamp itself Zero Angle for light emitting with high efficiency, light would not change angel because of the deposits of rain. Using new casting process has good mechanical properties. Smooth lamp cover without sharp edges, better protection of aircraft tire. Large area of the radiating ribs around the whole outer surface has good heat dissipation performance of the light fixture. Shock-proof design for integral Bulb holder can effectively prolong the service life of bulb. Reasonable parts positioning design, no need calibration for replacing the prism, optical components such as filters or bulb. Special process of anodic oxidation Lighting surface using a wear resistance, corrosion resistance. Convenient installation and replacement with a special disassembling tool. * Detail information should be provided if any special requirments. Accessories should be ordered separately. Fig 1. On 8” shallow base Fig 2. On 12” shallow base by means of 12”/8” adapter ring Fig 3. On 12” deep base by means of 12”/8” adapter ring * *The depth of deep base is 550 mm .

Electrical Supply Illuminant: One 48W/6.6A reflector halogen lamps Power: with matching isolation transformer equipped under the light or in other separate places. Photometric Data Candela Taxiway edge, FAA L-852T, Blue Packing Data 2 Light without base Dimensions: 230x230x230 mm3, Weight: 5.8 kg1 Light with shallow base Dimensions: 250x250x185 mm3, Weight: 6.4 kg Stuc.No