JUrsafeTCL-08_■ Taxiway Centerline Light Compliance with Standards Ordering Information ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-46 NATO: STANAG 3316 CAAC: GB-T 7256-2005 Taxiway centerline for staight and curved sections • Using new casting process has good mechanical properties. • Use integral patent prism structure, excellence performance of optical. • Smooth flat for light emitting with high efficiency, no deposits of rain above the prism. • Serious design, use different kinds of flitter and lamps could meet the requirements of several different types of lights. • The same series of lamp parts are easily interchangeable; effectively reduce the cost of production. • Smooth lamp cover without sharp edges, better protection of aircraft tire. • Large area of the radiating ribs around the whole outer surface has good heat dissipation performance of the light fixture. • Shock-proof design for integral Bulb holder can effectively prolong the service life of bulb. • Reasonable parts positioning design, no need calibration for replacing the prism, optical components such as filters or bulb. • Special process of anodic oxidation Lighting surface using a, wear resistance, corrosion resistance. • Lights equipped with special remove tool, convenience installation and replacement. TCL-08-X-XXX-XX-XP TCL-08 Taxiway Centerline Light Type S = Straight C = Curved Lamp Power 048 = 1x48W 096 = 2x48W Beam Color GG = both windows are green YY = both windows are yellow GY = window 1 is green; window 2 is yellow YG = window 1 is yellow; window 2 is green YB = window 1 is yellow; window 2 is blank GB = window 1 is green; window 2 is blank BY = window 1 is blank; window 2 is yellow BG = window 1 is blank; window 2 is green * Detail information should be provided if any special requirments. Accessories should be ordered separately. Fig 1. On 8” shallow base Fig 2. On 12” shallow base by means of 12”/8” adapter ring Fig 3. On 12” deep base by means of 12”/8” adapter ring * *The depth of deep base is 550 mm .

JUrsafeTCL-08_■ Taxiway Centerline LightElectrical Supply Illuminant: Two 48W/6.6A reflector halogen lamps Power: with matching isolation transformer equipped under the light or in other separate places. Figure 4 - Straight section, ICAO FigA2-12, Green Figure 5 - Curved sections, ICAO Fig A2-14, Green Packing Data 2 Light without base Dimensions: 230x230x230mm3, Weight: 5.8 kg 1 Light with shallow base Dimensions: 250x250x185 mm3, Weight: 6.4 kg