SFL
1 / 4Pages

Catalog excerpts

Sequency Flashing Light Compliance with Standards ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-51 NATO: STANAG 3316 CAAC: GB-T 7256-2005 Approach System, Flashing Light, Runway Threshold Indicator Ordering Information Communication Mode CAN = CAN communication PLC = Carrier communication Flashing Frequency 01 = 1 HZ 02 = 2 HZ * Detail information should be provided if any special requirments. Accessaries should be ordered separately.

Open the catalog to page 1

• Photometric Data, brightness, light regulating all in compliance with FAA requirements. • Using 400V flash tube, lower working voltage to the whole system (relative to the 2000V system), lower requirement for insulation, circuit board of unit control box has the function of boosting and steady voltage. In order to reduce cable requirements, whole system can work properly between 160-260V of power supply. • Scope of any point of brightness on photometric Data of plus or minus 15 horizontal degrees, plus or minus 5 vertical degrees. I 150-450cd; II 800-2000cd; m 8000-20000cd-• Main control...

Open the catalog to page 2

Sequency Flashing Light Light feature Pole (480) Base plate 145 Fig 1. On 12” shallow base Fig 2. On 12” deep base *The depth of deep base is 550 mm. In-pavement

Open the catalog to page 3