
Catalog excerpts

RCL-08 Runway Centerline Light Compliance with Standards Ordering Information ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-46 NATO: STANAG 3316 CAAC: GB-T 7256-2005 RCL-08-XXX-XX-XP RCL-08 Runway Centerline Light Lamp Power * Detail information should be provided if any special requirments. Accessories should be ordered separately. Inlet 1P=One plug 2P=Two plugs Using new casting process has good mechanical properties. Use integral patent prism structure, excellence performance of optical. Smooth flat for light emitting with high efficiency, no deposits of rain above the prism. Serious design, use different kinds of flitter and lamps could meet the requirements of several different types of lights. The same series of lamp parts are easily interchangeable; effectively reduce the cost of production. Smooth lamp cover without sharp edges, better protection of aircraft tire. Large area of the radiating ribs around the whole outer surface has good heat dissipation performance of the light fixture. Shock-proof design for integral Bulb holder can effectively prolong the service life of bulb. Reasonable parts positioning design, no need calibration for replacing the prism, optical components such as filters or bulb. Special process of anodic oxidation Lighting surface using a, wear resistance, corrosion resistance. Lights equipped with special remove tool, convenience installation and replacement. Beam Color CC = both windows are clear CR = one window is clear, one window is red CB = one window is clear, one window is blank RB = one window is red, one window is blank Runway centerline Fig 1. On 8” shallow base Fig 2. On 12” shallow base with 12”/8” adapter ring Fig 3. On 12” deep base with 12”/8” adapter ring * The depth of deep base is 550 mm .
Open the catalog to page 1
JUrsafeRCL-08_■ Runway Centerline LightElectrical SupplyIlluminant: Two 48W/6.6A reflector halogen lamps. Power: with matching isolation transformer equipped under the light or in other separate places.Photometric DataRCL-08 16 12 8 4 0 -16 -12 -8 -4 Minimum III 500cd I and II 250cd Minimum main beam III 2500cd I and II 1250cd Minimum III 37.5cd I and II 18.75cd Minimum III 75cd I and II 37.5cd Minimum main beam III 375cd I and II 187.5cd Runway centerline, FAA L-850A and ICAO Fig A2-7, Clear Runway centerline, FAA L-850A and ICAO Fig A2-7, Red 2 Light without base Dimensions:...
Open the catalog to page 2All AIRSAFE AIRPORT EQUIPMENT CO. catalogs and technical brochures
-
PLG 2
1 Pages
-
EOL-TE-LED
2 Pages
-
TCLM-08-LED
3 Pages
-
TCLMS-08-LED
2 Pages
-
TCLM-08
2 Pages
-
EOL-IA-LED
2 Pages
-
ITF
2 Pages
-
EOL-TE
2 Pages
-
TRM-35-B
1 Pages
-
TOEL-08
2 Pages
-
APC-12
2 Pages
-
WC-807-I
2 Pages
-
TCL-08-B/D
2 Pages
-
TAE-12
2 Pages
-
EUL-ED
2 Pages
-
EUL-TH
2 Pages
-
EBL-RE-LED
2 Pages
-
TDZ-08-LED
2 Pages
-
SFL
4 Pages
-
EUL-SR
2 Pages
-
EUL-CB-LED
2 Pages
-
EUL-AP
2 Pages
-
PAPI-300
4 Pages
-
APS-12
2 Pages
-
EUL-SR-LED
2 Pages
-
EUL-CB
2 Pages
-
EUL-AP-LED
2 Pages
-
EUL-TH-LED
2 Pages
-
RBCL-M-LED
2 Pages
-
EOL-OB
2 Pages