RBCL-M-LED Rotating Beacon Light (LED) Compliance with Standards Ordering Information RBCL-M-LED-XX/XXX ICAO: Annex 14,Volume I FAA: AC150/5345-12 L-801 CAAC: GB/T 7256-2005 RBCL-M Rotating Beacon Light Medium intensity Lamp Power LED = LED lamp Beacon Light in heliport and civil airport Beam Color CY = Clear and Yellow CG = Clear and Green CYG = Clear, Yellow and Green CCG = Clear, Clear and Green Use top international brands LED, effectively control the lamp temperature, life expectancy reached LED design limits. Excellent performance and lower energy consumption reduce the operation cost. No maintenance except lamp replacement. Standard driver perform high strength, long life time and lower noise. Maximum torque reaches 40Nm is the highest level of lower 90mm installation dimensions. Build-in temperature protection, improve fixture reliable. High frequency flashing achieve 25 to 37.5 times per minute. All fasteners use high quality stainless steel material. Reduce fixture volume to reach small volume of wind load. High wind load can withstand 160km/h. * Detail information should be provided if any special requirments. Accessaries should be ordered separately. 1. LED light 2. Metal hose 3. Triple metal hose connector 4. Cover 5. Turntable 6. Seal ring 7. Main shaft 8. Hollow ring 9. Pendant 10. Motor 11. Inverted cone box 12. Metal hose connector 13. Ballast 14. Wiring row

RBCL-M-LED Rotating Beacon Light (LED) Use Enviornment Environment temperature: -40 to +55 degree Power supply: 200VA to 240VA 50/60Hz Total power: 190W Flashing rate: 25 to 37.5 F/min Torque of drive motor: 40N.m Illuminant: 8×7.5W LED Description LED Metal hose Triple metal hose connector Cover Turntable Seal ring Hollow ring Pendant Motor Metal hose connector Ballast Wiring row