Ordering Information JUrsafeEUL-ED_■ Elevated Runway End Light Compliance with Standards ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-46 NATO: STANAG 3316 IEC: IEC 61827 CAAC: GB-T 7256-2005 • Aluminum-alloy casting with high strength and fine mechanical properties small wind ward area, with strong wind resistance capability. • Stainless steel fasteners achieve durable wear and corrosion resistance. • Reflective cup adopts a cold light cup principle, brightness goes forward, and heater goes back, ensure the front glass and the filter wouldn’t explode. • Waterproof grade IP65, has good sealing performance, keep the inner part of the lamp clean and dry. • Maintenance without special tools, dismantles easily, could replace the lamp with single hand. • Serious design, use different kinds of flitter and lamps could meet the requirements of several different types of elevated lights. • The front glass patented optical prism structure, could still guarantee the overall spot integrity even under the situation of Contamination or disturbance. • One two inch tubes could install under the light fixture according to the Specific requirements, convenient installation, firmness and reliability. • Adjuster could install on the light body directly, installation and adjustment is convenient and accurate. EUL-ED Runway End Light Elevated Uni-directional Lamp Power 100 = 1x100W Beam Color R=Red * Detail information should be provided if any special requirments. Accessories should be ordered separately. Fig 1. On 12” L-867 deep base. Fig 2. On ground with base plate 0165mm. * Please find detailed information in installation document Optional Purchase: Angle Calibrator (Order No. 54200)

EUL-ED_Elevated Runway End Light Electrical Supply Illuminant: One 100W/6.6A Pk30d halogen lamp Power: with matching isolation transformer equipped under the light or in other separate places. Photometric Data EUL-ED Applications Packing Data 1 elevated lights exclude base plate Dimensions: 230x230x275 mm3, Weight: 2.2 kg Accessories Stuc.No