EUL-CB_■ Elevated Approach Cross-bar Light Compliance with Standards Ordering Information ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-46 NATO: STANAG 3316 IEC: IEC 61827 CAAC: GB-T 7256-2005 Approach Crossbar • Aluminum-alloy casting with high strength and fine mechanical properties small wind ward area, with strong wind resistance capability. • Stainless steel fasteners achieve durable wear and corrosion resistance. • Reflective cup adopts a cold light cup principle, brightness goes forward, and heater goes back, ensure the front glass and the filter wouldn’t explode. • Waterproof grade IP65, has good sealing performance, keep the inner part ofthe lamp clean and dry. • Maintenance without special tools, dismantles easily, could replace the lamp with single hand. • Serious design, use different kinds of flitter and lamps could meet the requirements of several different types of elevated lights. • The front glass patented optical prism structure, could still guarantee the overall spot integrity even under the situation of Contamination or disturbance. • One two inch tubes could install under the light fixture according to the Specific requirements, convenient installation, firmness and reliability. • Adjuster could install on the light body directly, installation and adjustment is convenient and accurate. EUL-CB Cross-bar Light Elevated Uni-directional Lamp power 150=1x150W Beam Color C=Clear * Detail information should be provided if any special requirments. Accessaries should be ordered separately. Fig 1. On approach pole. Fig 2. On approach deep base. Fig 3. On approach mast. * Please find detailed information in installation document Option: Angle Calibrator (Order No. 54200)

EUL-CB Elevated Approach Cross-bar Light Electrical Supply Lamp: One 150W /6.6A Pk30d halogen lamp. Power: with matching isolation transformer equipped under the light or in other separate places. Packing Data 1 elevated lights Photometric Data MIN 1,000 cd Required Approach Cross-bar, ICAO Fig A2-1, Clear Angle of Main Light Beam Horizontal Vertical Average Intensity Average Intensity Actual (cd) Required (cd) 0.5 to 11.5° inner inclination angle for 2°1.5 to 12.5° Order number Front glass Front sealing strip Reflector Lamp holder Lamp PK30d Rear cover seal Terminal block Sealing head Styple...