Ordering Information JUrsafeEOL-TE-LED_■ Elevated Taxiway Edge Light (LED) Compliance with Standards. ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-46 NATO: STANAG3316 IEC: IEC61827 CAAC: GB-T 7256-2005 Taxiway edge • Using patented inverted cone prism structure, high utilization ratio of the light effect. • Strict control the light angle between 0-6 degrees, assurance in near distance, lamps do not cause the driver dazzled. • Use single top international brands LED, effectively control the lamp temperature, life expectancy reached LED design limits. • Significant energy-saving, lighting circuit load below 3KVA; 50W isolation transformer use for original lamps can be directly using in the rebuild project. • Ensure the consistency and purity of the light fixtures. • The same dimmer curve as the halogen lamps could use with the halogen lamps in airports at the same time. • With blue lamp body, the driver can identify light fixture during daytime without light brightness. • The prism edge adopts a unique design of taper; prevent the deposits of rain and sand. • Level tester can be directly placed on the upper cover, used to adjust the lighting angle. • Prism made of glass material, with toughening treatment, surface resistance to wind erosion. • Stainless steel fasteners achieve durable wear and corrosion resistance. • Use aluminum alloy materials as light body; make the whole light fixture more portable. • Modular design for lighting circuit board and easy to maintenance. EOL-TE Elevated Omni-directional Taxiway Edge Light Lamp Power LED = LED lamp Power Supply 220 = 220VAC 024 = 24VAC 012 = 12VAC 066 = 6.6A Beam Color B=Blue * Detail information should be provided if any special requirments. Accessories should be orderedseparately. Fig 1. On 12” L-867 deep base. Fig 2. On ground with base plate 0165mm. Fig 3. Stake mounting *The depth of deep base is 550 mm .

JmTEfieEOL-TE-LED_■ Elevated Taxiway Edge Light (LED) Electrical Supply Illuminant: 1x1W LED, blue Input Power: Less than 3.8 VA Power: with matching isolation transformer equipped under the light or in other separate places. Beam Intensity (cd) Taxiway edge, FAA L-861T, Omni-directionary, Blue Packing Data 5 elevated taxiway edge lights Dimensions: 315x270x385 mm3, Weight: 7.6 kg 10 pieces of base plate dia. 165mm Dimensions: 230x230x230 mm3, Weight: 14.5 kg