EOL-OB
1 / 2Pages

EOL-OB Elevated Obstacle Light (LED Low Intensity) Compliance with Standards Order Information EOL-OB-L-LED-XXX-X-R ICAO: Annex 14, Volume 1, Aerodrome Design and Operations FAA: AC 150/5345-46; AC 150/5354-46) EOL-OB-L Elevated Omni-directional Obstacle Light Low intensity Lamp Power LED = LED particle Low Intensity Obstacle Light dizzy to pilots at short range;  Use of international top brand LED with effective control of lamp temperature, service life reaches LED design ultimate;  Patented inverted-cone prism structure with high light effect;  Strict control of 0°~6° emitting light angle without causing Power Supply 220 = 220VAC 024 = 24VAC 012 = 12VAC 066 = 6.6A Operation Model A = without light control, not flashing B = with light control, not flashing C = with light control, flashing  Significant energy-saving, loop load of the light below * Detailed information should be provided if any special requirments. Accessories should be ordered separately. 3KVA; 50W isolation transformer can be used on original lights; The shrink of LED optional color temperature area ensures the color of guidance sign consistent and pure; Consistent dimming curve with halogen lamp, under unified use with existing halogen lights at airport; Long service life, effective energy-saving, maintenance-free and low power consumption of corresponding power supply system, great economic benefits to customers; Light body in blue color, pilots can easily identify lights without lighting up during the daytime; Prism edge uses unique design of taper, effective prevention of snow and sand; Horizontal meter can be directly placed on the lamp cover; Prism uses tempered glass in order to be resistant to wind erosion; Stainless steel fasteners, solid, durable and anti-corrosion; Aluminum alloyed light body, so as to be more light and portable; Modular design of light circuit board, easy to maintain. Installation 1. Cover 2. Prism 3. Seal Ring 4. Electrical Components 5. Lamp Body 6. Water Joint 7. Frangible Coupling 8. A6 Plug Fig 1. On 12” L-867 deep base. Fig 2. On ground with flange Ø165mm. Fig 3. Stake mounting *The depth of deep base is 550 mm .

EOL-OB Elevated Obstacle Light (LED Low Intensity) Electrical Supply Illuminant: 1×3W LED particle Power: supplied by matched isolation transformer or power source Total Power Consumption: ≤5VA Photometric Data Vertical Degree LED Elevated Obstacle Light Packing Data 4 elevated taxiway edge lights 8 pieces of Ø280mm flange Dimensions: 320×250×250 mm³, Weight: 7.6 kg Dimensions: 300×300×270 mm³, Weight: 29.8 kg Order number Upper cover Prism Seal ring without light control, not flashing with light control, not flashing with light control, flashing Electrical components Electrical components...