*myaeroexpo

APS-12

Product catalog summary

Specifications:
The APS-12 is an in-pavement approach side-row light with a 12-inch inset and tri-windowed design. It uses three 105W/6.6A reflector halogen lamps. The light without a base measures 330×330×150 mm and weighs 7.6 kg, while with a shallow base, it measures 350×350×185 mm and weighs 14.6 kg. The deep base has a depth of 550 mm.

Compliance with Standards:
The product complies with ICAO Annex 14, FAA AC 150/5345-46, NATO STANAG 3316, IEC 61827, and CAAC GB-T 7256-2005.

Features:

New casting process for good mechanical properties.
Integral patent prism structure for excellent optical performance.
Smooth flat light emitting surface with high efficiency.
Interchangeable lamp parts to reduce production costs.
Smooth lamp cover for better aircraft tire protection.
Good heat dissipation due to large radiating ribs.
Shock-proof design for bulb holder to prolong bulb life.
No calibration needed for replacing optical components.
Anodic oxidation process for wear and corrosion resistance.
Equipped with a special removal tool for easy installation and replacement.

Photometric Data:
The light achieves an actual average intensity of 6904 cd, exceeding the required 5000 cd.

Installation:
Includes components such as upper cover, sealing rings, prism, filter, lamp holder, and mounting plate. Accessories like the isolation transformer and Style 6 plug are ordered separately.

Applications:
Used for approach side-row lighting with a beam color of red and an angle of main light beam ranging from 0.5 to 10.5° horizontally and 1 to 11° vertically.

Catalog excerpts

APS-12 In-pavement Approach Side-row Light Compliance with Standards ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-46 NATO: STANAG 3316 IEC: IEC 61827 CAAC: GB-T 7256-2005 Ordering Information APS-12-X-315-R APS-12 Approach Side-row Light 12-inch/inset/tri-windowed Beam Direction L=fixture on the left side R=fixture on the right side Runway Threshold Approach side-row Approach Centerline Crossbar and Siderow Light (12-inch) * Detail information should be provided if any special requirments. Accessories should be ordered separately. Beam Color R=Red Using new casting process has good mechanical properties. Use integral patent prism structure, excellence performance of optical. Smooth flat for light emitting with high efficiency, no deposits of rain above the prism. Serious design, use different kinds of flitter and lamps could meet the requirements of several different types of lights. The same series of lamp parts are easily interchangeable; effectively reduce the cost of production. Smooth lamp cover without sharp edges, better protection of aircraft tire. Large area of the radiating ribs around the whole outer surface has good heat dissipation performance of the light fixture. Shock-proof design for integral Bulb holder can effectively prolong the service life of bulb. Reasonable parts positioning design, no need calibration for replacing the prism, optical components such as filters or bulb. Special process of anodic oxidation Lighting surface using a, wear resistance, corrosion resistance. Lights equipped with special remove tool, convenience installation and replacement. Fig 1. On 12” shallow base Fig 2. On 12” deep base *The depth of deep base is 550 mm. 1. Upper cover 2. Upper sealing ring 3. Prism 4. Prism gasket 5. Prism retainer 6. Upper cover sealing ring 7. Filter 8. Lamp holder 9. Lamp 10. Mounting plate 11. Terminal block 12. Inner cover 13. Valve core 14. Style 6 plug

Open the catalog to page 1

APS-12_■ In-pavement Approach Side-row LightElectrical SupplyIlluminant: Three 105W/6.6A reflector halogen lamps. Power: with matching isolation transformer equipped under the light or in other separate places.Photometric Data Applications Light without base Dimensions: 330x330x150 mm3, Weight: 7.6 kgLight with shallow base Dimensions: 350x350x185 mm3, Weight: 14.6 kg Stuc.No

Open the catalog to page 2

APS-12

APS-12

Catalog excerpts

All AIRSAFE AIRPORT EQUIPMENT CO., LTD. catalogs and technical brochures