APC-12 In-pavement Approach Cross-bar Light Ordering Information Compliance with Standards ICAO: Annex 14, Volumn 1 FAA: AC 150/5345-46 NATO: STANAG 3316 IEC: IEC 61827 CAAC: GB-T 7256-2005 APC-12-X-315-C APC-12 Approach Cross-bar Light (12-inch/inset/tri-windowed) Beam Direction L=fixture on the left side R=fixture on the right side Runway Threshold Approach cross-bar Approach Centerline Crossbar and Siderow Light (12-inch) * Detail information should be provided if any special requirments. Accessories should be ordered separately. Beam Color C=Clear Using new casting process has good mechanical properties. Use integral patent prism structure, excellence performance of optical. Smooth flat for light emitting with high efficiency, no deposits of rain above the prism. Serious design, use different kinds of flitter and lamps could meet the requirements of several different types of lights. The same series of lamp parts are easily interchangeable; effectively reduce the cost of production. Smooth lamp cover without sharp edges, better protection of aircraft tire. Large area of the radiating ribs around the whole outer surface has good heat dissipation performance of the light fixture. Shock-proof design for integral Bulb holder can effectively prolong the service life of bulb. Reasonable parts positioning design, no need calibration for replacing the prism, optical components such as filters or bulb. Special process of anodic oxidation Lighting surface using a, wear resistance, corrosion resistance. Lights equipped with special remove tool, convenience installation and replacement. Fig 1. On 12” shallow base Fig 2. On 12” deep base *The depth of deep base is 550 mm. 1. Upper cover 2. Upper sealing ring 3. Prism 4. Prism gasket 5. Prism retainer 6. Upper cover sealing ring 7. Lamp holder 8. Lamp 9. Mounting plate 10. Terminal block 11. Inner cover 12. Valve core 13. Style 6 plug

APC-12_■ In-pavement Approach Cross-bar LightElectrical SupplyIlluminant: Three 105W/6.6A reflector halogen lamps. Power: with matching isolation transformer equipped under the light or in other separate places.Photometric Data Applications Packing DataLight without base Dimensions: 330x330x150 mm3, Weight: 7.6 kgLight with shallow base Dimensions: 350x350x185 mm3, Weight: 14.6 kg Stuc.N|