DTS-TH/E, DTS-TW/E
2Pages

als •■•••••••••■• ATRFTELD LIGHTING SYSTEMS UK LTD Compliance ■ ICAO- Annex 14 Vol. 1 ■ IEC: 61827 ■ EASA CS-ADR-DSN ■ FAA: AC 150/5345-46 (current edition) ■ FAA Engineering Brief #67 (current edition) ■ STANAG 3316 The ALS LED Elevated Threshold and Threshold Wing Bar Lights are part of our new DTS range of Airfield Ground Lighting incorporating all the latest technology available in this field. ■ Long life, effective energy saving, maintenance-free ■ Consistent dimming curve with halogen lamp fixture, complying with FAA EB67. ■ Power consumption: < 32 VA ■ Power factor above 0.9, minimizing the power network interference ■ Power converter with integrated 5 steps Active Fail Open System ■ Strict LED colour management to ensure colour consistency ■ High strength Aluminium-alloy casting with Stainless steel fasteners ■ Contained dimensions reducing risk of damages due to jet blast. ■ Direct mounting onto one inch or two inch dia. tube, breakable coupling or frangible mast head. ■ IP54-grade ingress protection ■ Phosphating and baked polyester electrostatic powder coating. ■ Colour: aviation yellow DTS-TH&TW/E-G(L) High Intensity Elevated lights are used in CAT I, II & III as: ■ Threshold Lights ■ Threshold Wing Bar Lights Ordering Code Elevated Threshold Light DTS-TH/E-G(L) Elevated Threshold Wing Bar Light DTS-TW/E-G(L) Airfield Lighting Systems UK Ltd. - Aviation House, Russell Gardens, Wickford, Essex, SS11 8BF, UK www.alsuklt

als •■•••••••••■• ATRFTELD LIGHTING SYSTEMS UK LTD Average Intensity Average Intensity ICAO (cd) Measured (cd) Horizontal Beam Vertical Beam Elevated Threshold Wingbar Green 1000 13646 ± 7? 1.5-10.55 degrees vertical degrees vertical minimum average required lOOOOcd minimum average required lOOOOcd degrees horizontal degrees horizontal LED elevated wing bar lights - green LED elevated runway threshold lights - green Preliminary Data Sheet. The descriptions and features contained in this publication are given for information only and do not constitute an engagement for our company. We...