Airfield Equipment and Services SL Compliance         ICAO Annex 14 Para 5.3.4, FAA AC 150/5345-46, EB 67 D IEC61827 EASA CS-ADR-DSN.M.675 STANAG 3316 CAAC GB-T 7256-2005 AENA DIN/OSEYN/PPT/018-02/09 High intensity Approach lighting in cat. I, II and III. The Inset High Intensity LED Approach Light APPS-12-LED is part of the new major step forward completed by Airsafe Airport Equipment with the introduction of the top end of the range of LED light fittings. A team of highly skilled Mechanical, Electrical, Thermal, Optical, and Reliability Engineers worked hand in hand with Industrial Designers, Lab Technicians, and Manufacturing personnel to accelerate the development and commercialization of this new 12 inch inset low protrusion LED range for High Intensity applications The range of 12 inch LED inset light fittings covers the following applications: • Approach • Threshold • Threshold Wing Bar • Runway End • Combined Threshold/Runway End • Runway Edge Finish • Outer Surface with wear & corrosion resistant treatment. • High-precision machining ensuring overall precision and excellent quality. • Stainless steel hardware. Electrical Supply 6.6 A, through adequate isolating transformer. www.aes-europe.com Inset High Intensit

Airfield Equipment and Services SL Features • 12” outer diameter • Strong cold forged aluminium upper cover • 6 mm protrusion above surface • Commonality of parts with the entire 12 inch low protrusion range for ease of maintenance and reduction of the spare parts requirement Inset High Intensity LED Approach Light • Upper surface without sharp edges • Useful Lamp Life (LED) > 50.000h • Colours: White and Red • Nominal Current: 6.6A • Power consumption: 52W only • Power converter with integrated 5 steps Active Fail Open System • Fully dimmable as per EB67E • Built-in surge protection • Efficient...

Airfield Equipment and Services SL POWER CONVERTER The APPS-12-LED is equipped with a power converter of advanced technology and of proven design. The main characteristics of the power converter are: • Galvanic separation between the input power supply circuit 6.6 A and the output PWM circuit powering the LED array. • Light emission proportional to the input current as requested by FAA EB67D. • The aperture of the secondary circuit as requested by FAA EB6-7D is activated within approximately 1 second (programmable from 800 to 1600 ms) after the fault so that the central control system can take...

Airfield Equipment and Services SL MOUNTING SYSTEM Inset High Intensity LED Approach Light 12 Inch IEC Shallow Base o The shallow bases are made of forged high quality aluminium alloy. o The combination of qualities of forging aluminium makes it the ideal solution for this type of application. o They are suitable for mounting of 12” diameter IEC fittings. o High precision machining ensures overall quality and precision of the shallow base o Threaded holes with stainless steel sleeve for better mechanical strength o Available with cable entries on the sides or from the bottom o Overall dimensions:...