Mask, Silicone MSK-AS Specifications Part Number: 4110-711-( ) Sizes: Small (-1), Medium (-2), and Large (-3) Length: Hose, 36 Inches Weight: 0.75 Lbs. Material: Mask Face/Silicone Rebreather/Taffeta Inlet: 1/4 Inch O2 Bushing Operating Temp. Range: +20° F To 120° F (-7° C To 49° C) General Description The 4110-711 Series continuous flow oxygen mask is intended for use of crew and passengers in the general aviation industry at a maximum altitude of 25,000 feet. These masks have been FAA approved and manufactured in accordance with the provisions of TSO-C103. Optional equipment includes industry standard fitting for connection to portable and built-in oxygen system equipment. Oxygen System Requirements Use aerox® Aviation Oxygen Systems flowmeter (optional) to adjust the flow rate to coincide with the aircraft altitude. A minimum oxygen flow of 2.5 liters per minute (NTPD) must be supplied. It is the responsibility of the user to assure that the oxygen system being used is capable of supplying the pressure required to maintain the proper flow rate. This mask is equipped with a hose bushing allowing for the insertion of a barbed component. The user is responsible for the selection and installation of the proper components to achieve an oxygen flow of 2.5 LPM during use. (Reference: 14 CFR 23.1441, Oxygen Equipment and Supply) Storage Temperature Range: -20°F To +160° F (-29° C To +71° C) Flow Meter Valve (Glo-Meter) Approvals TSO-C103, Technical Standard Order for Continuous Flow Oxygen Mask As