OBS MKII
3Pages

{{requestButtons}}

Catalog excerpts

OBS MKII - 1

PRODUCT SUMMARY Design: Material: IP Rating: Light Color: NVG Enhanced: Type: Obstacle LED light Aluminum IP 66 Red Optional Type A (10cd) or Type B (32cd) Power supply Power: Standards: LED Lifespan: iControl Ready: 24‐60 VDC / 110‐230 VAC 10/20 Watts ICAO > 80’000 hours Optional DESCRITPION: This very robust obstacle Led light is easy to install and doesn’t need any maintenance. The waterproofness has been elaborated to guarantee that no water or humidity came into the light. A special physical barrier guarantee that no humidity can enter into the connection (WatBar). The OBS MKII is made with 8 power LED from specially selected for their quality, lifetime (< 80’000 hours), and photometrical stability. Color of the glass dome is accorded to the LED direct color, it guarantees no chromatic or photometric aberration. INFRARED (NVG ENHANCED) Our special infrared LED light engine has a very high response on NVG units. That means, that this NVG enhanced lights will be highly amplified by the NVG. Environment and other lights are still visible with the same quality. For pilots flying without NVG, no modification is visible on the dual lighting system. Optionally this light can be used with the iControl system. The electronic system integrated in the light can detect a failure and communicate with the iControl. For example: you can configure to receive an email if any light has a problem. You are able to watch the status and failure information of each light directly from a dedicated webpage. It is also possible to switch ON and regulate the system from an I phone or Android mobile phone, and much more… iControl makes the installation, flight, and mainte

Open the catalog to page 1
OBS MKII - 2

TECHNICAL DESCRIPTION: Mechanical characteristics: Body material: Aluminum – Powder Coating – Aviation Yellow Mineral tempered Glass Diameter: 165 mm (max) Height: 235 mm Weight: 1.1 kg Temperature range: ‐40° to +70° C Protection Class: IP66 Water / Humidity: Insulation WatBar – Physical insulation between the “connection room” and the light Fixing: ½ ‘’ Gas tube or with base plate (tripod) Optical characteristics: Technology: Light source: Available color: Intensity (White): Horizontal output: LEDs Lifespan: Optional NVG (infrared): High Power LED Aerolighting EcoLED 825 R Red See diagram...

Open the catalog to page 2
OBS MKII - 3

PHOTOMETRIC DATA: Degrés vertical The descriptions, photometric measurements and features contained in this publication are given for information only and do not constitute an engagement for our society, which reserves the right to change them without prior notification. Aerolighting SA Rte de Formangueires 9 CH‐1782 Belfaux Switzerland info@aerolighting.ch www.aerolig

Open the catalog to page 3

All Aerolighting SA catalogs and technical brochures

  1. PHL‐HFT

    3 Pages

  2. TRA-6624F

    1 Pages

  3. LBR-24-480

    2 Pages

  4. WDI-P Serie

    4 Pages

  5. LBR II DA

    2 Pages

  6. HXX Base

    3 Pages

  7. AL-2000

    7 Pages

  8. AL-xFlash

    2 Pages

  9. HFTR Series

    6 Pages

  10. LBR II DA

    2 Pages

  11. HIN

    1 Pages

  12. HeliX

    7 Pages