LBR II DA Power supply for Helipad lights PRODUCT SUMMARY Design: Dimension (on DIN rail): Brightness regulation: Input: DIN Rail Power supply for Helipad Length: 250mm Height: 180mm 10% 30% 100% 4 positions switch 90-260 VAC 50/60hz Power: Max number of light Standards: Alarm: 480W 35 lights ICAO Annex 14, Vol II Power supply and regulator failure The LBR II power supply is designed to control and regulate up to 35 inset or elevated LED lights. Brightness regulation is in accordance with the ICAO Annex 14 Vol II. This system is “plug&play” just connect the input power (230V) and connect the output (4x2.5mm2) to the lights circuit. Once connected, it will immediately work. In case of power supply or regulator failure, a dry contact relay will switch to alarm mode. Brightness regulation can be easily operated using a 4 position switch. This system allow to obtain all necessary feature on the Helipad using a simple and small sized power supply. The LBR II is designed to be installed directly on a electrical panel or in a independent box. Aerolighting SA Rte de Formangueires 9 CH-1782 Belfaux Switzerland [email protected] www.aerolighting.ch www.aero.lighting

LBR II DA Power supply for Helipad lights TECHNICAL DESCRIPTION : Mechanical characteristics: Fixing: Dimension: Weight: Temperature range: Relative humidity: Electrical characteristics: Input Supply Voltage: Power (max): Number of light (max): Output: Output recommended cable: Control Command type: Alarm: Din Rail Length: 250mm Height: 180mm 3.2 -30° to +70° (for temperature higher than 50° see derating curve ) 20 – 95% RH (non-condensing) 90-260 VAC 480W 35 Lights (other version available for more lights) +24VDC // 0V // control line // control line : 4x 2.5mm2 or higher Recommended max. cable...