Quick Disconnect Couplings & Hydraulic Valves

Performance without Compromise on a Global Scale Since 1935, the Quick Disconnect and Valve Division of Snap-tite Inc., has offered more combinations, sizes, and types of quick disconnect couplings than any other manufacturer in the world today. Hundreds of markets and industries depend on our couplings’ ability to perform under the most demanding conditions. From the ocean floor to the very edges of our solar system, and everywhere in between, Snap-tite quick disconnects set the industry standard. Our strength is providing expert solutions matched to the needs of each customer... highly consistent...

71 series Applications: Hydraulic, chemical service, ideal for test stands and applications where endurance and cleanliness is a requirement. • Ball-locking, push-to-connect construction • Flush face design allows for easier contaminant inspection and cleaning • Flush valve virtually eliminates fluid loss and air inclusion • Dirt tolerant, heavy duty construction withstands abusive treatment • Superior flow characteristics and low pressure drop • Det Norske Veritas approved • Plated steel or 316 stainless steel constructionf • Working pressures to 10,000 psi (690 bar) • Sizes from 1/8" to 2"...

Drybreak 78 series Applications: Oil well equipment, sand and salt spreaders, dump and demolition trailers, live bed trailers and other heavy duty applications. • Heavy duty wing nut or hex nut for easy connection of threaded units • Interchangeable with Aeroquip FD51 and others • Minimal spillage and air inclusion • Bonded valve seal permits connecting and disconnecting without seal washout • Brass construction • Working pressures to 3,000 psi (207 bar) • Sizes 3/4" to 1-1/2" 28-1 series Applications: Low pressure hydraulic systems, high purity systems, fuel systems, electronic coolant and high...

Drybreak 77 series Applications: Hydraulic circuits, test stands, and Hydrotesting for for offshore drilling and production platforms. • Superior flow characteristics • Internal safety sleeve-lock prevents accidental disconnection • Heavy duty construction • Proven dog-lock mechanism provides safe, positive connection • Various end fittings available including Autoclave end connections • Plated steel or stainless steel construction † • Working pressures to 36,000 psi (2483 bar) • Sizes 1/4" (6mm) Subsea Couplings Snap-tite has designed and manufactured couplings for the Offshore Oil and Gas industry...

Poppet H, IH, PH series Applications: General purpose, plastic molding, machine tool, test equipment, agricultural, Department of Transportation, mobile hydraulics. • Traditional ball-locking two-piece construction allows end fitting versatility • Lowest pressure drop for size • Smallest envelope size for size • Det Norske Veritas approved • Smooth jet stream valve design • IH Option for reciprocating, pulsating and rotary motion air tools (single shut-off combination) • PH Option for connection against static hydraulic pressure (one side only) • Plated steel, brass, aluminum or 316 stainless...

Poppet 72 series Applications: General purpose, plastic molding, machine tool, test equipment, Department of Transportation, mobile hydraulics • Interchangeable with other standard ISO 7241-1 Series B couplings • Proven ball-lock mechanism for positive connection • Meets or exceeds ISO 7241-1 Series B performance • Exceeds pressure and flow characteristics of competition • Plated steel, brass, 303 or 316 stainless steel construction † • Working pressures to 7,500 psi (517 bar) • Sizes 1/8" - 1" • Double shut-off 76 series Applications: Hydraulic tools and rescue equipment. • Interchangeable with...

60 series Snow plows, agriculture, forestry, construction equipment, oil tools, steel mills. • Interchangeable with Parker 4000 Series and others • Proven ball-lock mechanism for positive connection • Superior pressure and flow characteristics • Choice of seal materials to handle a variety of fluids • Plated steel construction1 • Working pressure to 3,000 psi (207 bar) • Sizes 1/4" & 3/8" • Double shut-off 61 series Applications: General purpose, plastic molding, machine tool, test equipment, agriculture, Department of Transportation, mobile hydraulics. • Dimension and performance requirements...

K series Applications: Used with a wide variety of chemicals and cryogenic fluids. For frozen food processing, liquid nitrogen and fueling applications. • Pressure capability to 1,000 psi (69 bar) • Sizes 3/8" - 2" • Temperature range of -400° to 400°F (-240° to 205°C) • Kel F® or Teflon® seals available • Stainless steel or optional exotic alloy construction • Valve configurations - available with double or single shut-off valving or straight through as required Applications: Aromatic hydrocarbons, esters, ketones, ethers, strong caustics, sulfuric acid, hydrofluoric acid and many other highly...

Poppet 73 series Applications: Water jetting, water blasting systems. • Heavy duty construction • Positive locking collar prevents accidental disconnection • Various end fittings available including Autoclave end connections • Proven ball-locking mechanism provides positive connection • Stainless steel construction • Working pressures to 43,500 psi (3000 bar) • 1/4" (6mm) size • Double shut-off or straight through 56 series Applications: Rugged, high pressure equipment used for removal of mill scale or paint, cleaning of maritime vessels and equipment. • Proven dog-lock mechanism provides safe,...

NGV Fueling Products Snap-tite continues to introduce to the CNG industry the latest innovative designs including our newest release, the Dispenser Hose Breakaway, which helps to protect the CNG dispenser and the vehicle in the event of a drive-away. Snap-tite is also an AGA/CGA NGV-1 supplier of certified Receptacles, Nozzles and Check Valves. • Balanced design of dispenser hose breakaway maintains a positive connection until a breakaway cycle is initiated • Breakaway nipple is equipped with a durable polyethylene bumper to protect the nipple form in the event of a breakaway • Rugged, corrosion...