2018 ATL PRODUCT GUIDE MOTORSPORT AUTOMOTIVE MARINE AEROSPACE DEFENCE & SECURITY SUBSEA INDUSTRIAL INFLATABLES SPECIAL PROJECTS Aero Tec Laboratories Ltd is the world's leading manufacturer of Safety Fuel Cells for use in Motorsport and beyond. ATL supplies vehicle manufacturers and club racers alike, and has supplied every F1 team for over 25 years. Fuel Cells range from custom built examples, to a large selection of standard Saver Cells, and include refuelling equipment as well as fuel system spares and accessories. Saver Cells © Manufactured from unique ATL-565 material, supplied fully foam baffled with a 6 x 10" top plate, 2 x -6 fuel pick-ups, 1 x -6 roll-over vent valve, 0 2.25” filler neck with anodised % turn filler cap with non-return valve, mounted on a 76.2mm PCD with 6 bolts and a pre-marked level sender pattern. Note: SA-AA-030 is fitted with 4 x 6” top plate, 1 x -6 fuel pick up and filter, 1 x -6 roll-over vent and 1 x 0 2.25” filler neck with safety valve and cap. FIA FT3-1999 approved. © Capacity Container Dimensions Saver Cell Part No* Alloy Container Part No. SA-AA-030 SA-AA-031 *Saver Cells are available without top plate or with blue foam for use with Diesel. To order use the following: Without top plate, add 4 to the part no. (E.g. SA-AA-044) With Blue Foam, add 5 to the part no. (E.g. SA-AA-045) With Blue Foam without top plate, add a 6 to the part no. (E.g. SA-AA-046) All fuel cells experience some swelling when subjected to fuels (approx. 2-4% linear), therefore allow 4 weeks of fluid contact for Racells and Saver Cells bladder dimensions to stabilise. Internal Collector Systems DescriptionPart No. ^ Internal Collector System 3 Litre - no pump mounts (CL-AA-023) © Internal Collector System 3 Litre with 1 pump mount to suit VDO and Walbro pumps. Can also accept PRV housing.* (CL-AA-024) Internal Collector System 3 Litre - with 1 pump mount to suit Bosch pump.* (CL-AA-026) © Internal Collector 3 Litre with 2 pump mounts to suit VDO and Walbro pumps. Can also accept PRV housing.* (CL-AA-027) Return-less system fitted with a 1 x 5 Bar (200l/hr) Pump (PU-AB-030), Filter (FT-AC-003) and PRV housing. (PRV not included) (CL-AA-029) Saver ’D' Cells Capacity 30 Litre 30 Litre with Collector & Rear Outlet 45 Litre G 45 Litre with Collector & Rear Outlet (7 60 Litre NEW! (See ATL website for fitment info) 566 x 566 x 244mm D Cells also available in ATL lightweight rubberised fabric for weight savings. Racell Fuel Cells CapacityDimensionsPart No. 10 Litre 203 x 203 x 381mm SA-AA-010 10 Litre with Blue Foam for Diesel/Methanol 203 x 203 x 381mm SA-AA-015 20 Litre with Blue Foam for Diesel/Methanol 254 x 254 x 457mm SA-AA-025 Porsche 911 Saver Cell DescriptionPart No. © Porsche 911 (Pre-'89) 100 Litre Saver Cell (SA-AA-200) Porsche 911 (Pre-'89) 100 Litre Saver Cell without Top Plate (SA-AA-204) Aluminium Container to suit SA-AA-200/204 (SA-AA-201) Custom Saver Cells © ATL can design and manufacture custom shaped Saver Cells, exceeding FIA FT3-1999 specification. These uniquely tough and lightweight Fuel Cells are constructed from the renowned ATL-565 material. The ATL Saver Cell is the only genuine low cost option for an FIA FT3 Fuel Cell, and ATL's manufacturing capabilities and cost control mean that this safe FIA approved solution is available from relatively low volumes of production. There are very few limitations for size and shape, and ATL's range of high technology solutions can be applied just as they are with a flexible bladder. Custom Saver Cells have a short lead time meaning great flexibility, particularly for low volume vehicle manufacturers looking for a cost effective solution with market leading capabilities. Enquire with the ATL Sales Team for further information. ATL Technology Centre, Denbigh Road, Bletchley, Milton Keynes, England, MK1 IDF t: +44 (0) 1908 351700 e: [email protected] www.atlltd.com Twitter: @ATLFuelCells

MOTORSPORT AUTOMOTIVE MARINE AEROSPACE DEFENCE & SECURITY SUBSEA INDUSTRIAL INFLATABLES SPECIAL PROJECTS © 6 x 10" Plate Featuring; (2) -6 Holes, (1) -8 Hole, (1) 3-Pin Inserted Pattern, (1) VDO Inserted Pattern & (1) 76.2mm PCD with 6 Bolt Inserted Pattern. Inc Gaskets, Bolts & Washers (PL-BG-021) @ 6 x 10" Plate Featuring; (2) -6 Holes, (1) -8 Hole, (1) 3-Pin Inserted Pattern & (2) 76.2mm PCD with 6 Bolt Inserted Pattern. Inc Gaskets, Bolts & Washers (PL-BG-022) © 6 x 10" Standard Saver Cell Plate (See Page 1) (PL-BG-311) ©3 Pin Plate to suit RG-AC-001 M24x1.5 PRV Housing (PL-CB-007)...

MOTORSPORT AUTOMOTIVE MARINE AEROSPACE DEFENCE & SECURITY SUBSEA INDUSTRIAL INFLATABLES SPECIAL PROJECTS Refuelling Bottles Single Valve_ 1.5” Probe Straight Neck 1.5” Probe 135° Neck @ 2” Probe Straight Neck 2” Probe 135° Neck Dual Valve_ 1.5” Dual Probe Straight Neck 2” Dual Probe Straight Neck @ 2” Dual Probe 135° Neck Single 2” Probe with Remote - 12 Staubli Vent Straight Neck 135° Neck Single 2” Probe with Remote 2” Vent_ Straight Neck ® 135° Neck Accessories_ Refuelling Stand for Bottles 2” Dry Break Refuelling Valves Closed Loop Refuelling Bowser <§5 The ATL Refuelling Bowser allows the...

MOTORSPORT AUTOMOTIVE MARINE AEROSPACE DEFENCE & SECURITY SUBSEA INDUSTRIAL INFLATABLES SPECIAL PROJECTS Quick Disconnect Couplings Description SPT08 -6 Male Socket (No Lanyard) QD SPT08 -6 Male Socket (With Lanyard) 98 QD SPT08 -6 Male Plug Panel Mount QD SPT08 -8 Male Plug Panel Mount 99 QD SPT08 -6 Male Plug (With Alloy Cap) 100 QD SPT08 -8 Male Plug (With Rubber Cap) 101 QD SPT12 -12 Male Socket 102 QD SPT12 -12 Male Plug Panel Mount 103 QD SPT12 -12 Male Plug 104 QD SPT12 -12 6 Bolt Flange Plug 105 QD Push Fit 10mm Straight -6 barb 106 QD Push Fit 8mm Straight -5 barb 107 QD Push Fit 8mm...