Fuel anti-icing additive ICE-5 Meets ASTM STANDARD D4171-03 and MIL-DTL-85470B and MIL-DTL-27686 Product description ICE-5 is a fuel anti-icing additive for turbine fuel and works as a fuel icing inhibitor. ICE-5 is mixed in the fuel at rates of 0,10% up to 0,15% by volume. If the aircraft has no heating system for the fuel, small amounts of free water in the fuel can freeze and block fuel lines, filters and valves. Properly used ICE-5 will prevent icing of the water in the fuel system. A positive side effect of ICE-5 is the inhibition of bacteria-growth in fuel tanks. Properties - Physical state at 20° Liquid C: - Colour: Colourless - Odour: Characteristic - Final boiling point (° 194° C): C - Density: 1,02 - Vapour pressure (at 20° 0,13 C): - Solubility in water: Complete - Flash point (° 96,1° (ASTM G93) C): C Packaging Available in 500 ml aerosols sprayer with tube and clip, 1 liter bottle and 200 liter barrel. Certification Complies with ASTM-D4171-03 and is produced according MIL-DTL-85470B and MIL-DTL-27686. Application Careful mixing with the fuel of ice-inhibitors, such as ICE-5 DiEGME is very important! Just pouring the product in the tanks will result in insufficient mixing and separation of the inhibitor with the fuel. For direct addition at refueling, ICE-5 aerosols are very handy. The aerosols are delivered with a flexible tube and a clip for direct dosing in the stream of jet fuel coming out of the nozzle. ICE-5 is usually mixed in the fuel at rates of 0,10% and 0,15% by volume. Safety - Review the Material Safety Data Sheet (MSDS) before use. - Shelf life: 36 mon