Cleango 500
16Pages

{{requestButtons}}

Catalog excerpts

Cleango 500 - 1

/// I schmidt a brand of aebi schmidt

Open the catalog to page 1
Cleango 500 - 2

A compact all-rounder for the toughest demands The Cleango 500 is an ideal choice for daily cleaning work in urban areas, on pavements and cycle paths and on industrial sites. It represents a unique combination, uniting compact dimensions with a voluminous 5 m³ debris capacity. The Cleango 500 also promises a long service life, greener engine technology (Euro 6c emissions standard) and unsurpassed driver convenience. Further advantages include its low lifecycle costs, high-qua- lity components and innovative technology. Thanks to the capacious debris hopper, with a system volume of 5 m³,...

Open the catalog to page 2
Cleango 500 - 3

Ergonomics and comfort • Sound-proof driver’s cab with optimum all-round visibility for safe operation in road traffic • Excellent view of sweeping unit and suction shaft intake for precise control of operations • Smooth steering • Minimum pedal pressure required • Ergonomic driver seat • Height- and angle-adjustable steering column • All operating and control instruments within optimum reach • Air-conditioning • Auto-Drive control lever Quality • Corrosion protection throughout • High-quality branded components • Excellent reliability • Cost-effective operation • Low wearing • Long-term...

Open the catalog to page 3
Cleango 500 - 4

Unmatched comfort, unique visibility The design of the driver’s cab focuses on operational comfort and ergonomics to lower stress during operations. The cab is accordingly spacious and has first-rate sound-proofing and vibration damping. Drivers can concentrate better, and work fast yet safely, at a noise level of only 66 dB(A). Heating and air conditioning systems keep the interior pleasant to work in. Optimum ventilation: fresh air is drawn in from above and filtered, so that the air inside the cab is always clean and low on dust in any weather. The performative, as-standard...

Open the catalog to page 4
Cleango 500 - 5

Benefit from: • ideal visibility, as the windscreen extends right to the cab floor. • an observation window in the cab floor, for a clear view of the suction intake and disc brushes. • a spacious driver’s cab with pleasant interior conditions and full-size passenger seat. • a new Schmidt steering column boasting excellent ergonomics and unique adjustment options, making it easier to get in and out. • unmatched ease of use and the quietest cab in its class. • a slim steering column with only minimal controls, and large wing mirrors, giving the driver a perfect view of both working area and...

Open the catalog to page 5
Cleango 500 - 6

A flexible sweeping system helps ensure thorough cleaning in any situation. The towed disc brush system, mounted in front of the front axle, achieves a sweeping width of 2,200 mm. As brushes are towed and not shunted, there is significantly less collision damage and considerably reduced wear on the brushes. The entire sweeping unit can be hydraulically shifted 300 mm to each side. The suction intake and disc brushes form a single unit, while the parallelogram-type brush unit suspension guarantees optimum tracking and thus coverage to the suction intake. Brush ground pressure is adjusted...

Open the catalog to page 6
Cleango 500 - 7

With the optional, autonomous brush control system, the angle of the disc brushes can be hydraulically adjusted to the road conditions from the driver’s cab. Ground pressure on each disc brush can also be adjusted individually from the driver’s cab. This makes it even easier to thoroughly sweep out right-angled corners, gutters and hard-to-reach areas. With the optional third brush, the span swept can be as wide as 3,550 mm. This gives scope for better coverage rates (up to 64,000 m²/h), sweeping on two levels, as well as efficient sweeping of surfaces that are heavily encumbered by street...

Open the catalog to page 7
Cleango 500 - 9

Thoroughly thought through The sizeable debris hopper with a system volume of 5 m³ allows for a greater operational range and removal of considerable amounts of debris. Impressively enough, this leango 500 C has the highest payload in its class. So even when the debris collected is heavier than usual, the hopper can be filled to the brim. The low-dump system comes as standard, and a high-dump system with slide gate for emptying containers is available as an option. The tailgate is always locked hydraulically, with a sturdy rubber gasket for a water-proof seal between tailgate and hopper....

Open the catalog to page 9
Cleango 500 - 10

Safety, reliability, comfort The Cleango range uses only high-quality components from selected brand-name manufacturers. Effective corrosion protection, to ensure long-term use in any weather, is a top priority. The vehicle frame is made of high-strength steel and is primed and painted using painstaking methods. The hopper frame is also made to a sturdy design in wet-painted steel. The bottom and sides of the hopper are lined with either aluminium or stainless steel plates as required. Alternatively, we can manufacture the hopper entirely in stainless steel. The ladder frame forms the...

Open the catalog to page 10
Cleango 500 - 11

Benefit from: • first-rate corrosion protection. • selected brand-name components. • excellent reliability. • safe and comfortable driving. • the highest payload in its class. With its rugged suspension, capacity for high axle loads, and twin tyres on the rear axle, the Cleango 500 can carry payloads of up to 6.6 tonnes. • A broad 68° steering angle, combined with the short 1,850 mm wheelbase, facilitates an extremely small turning circle: sweeping continues while the sweeper turns in one go. • certified PM10/PM2,5

Open the catalog to page 11
Cleango 500 - 12

• Sound-proofing package • Automatic central lubrication system • LED lighting package • Ice and snow attachments • Front-mounted brush • Additional water tank (for top and sides) • Hand-held suction hose • Roof outrigger with high pressure lance • Front brush • High-pressure cleaner • Reversing and suction shaft camera • Weed brush

Open the catalog to page 12
Cleango 500 - 14

Technical specifications Hopper System volume approx. Discharge angle (low dump) Discharge height (low dump) Discharge height (high dump) Drive system VM R756 Euro 6c with closed particulate filter system, urea (AdBlue) injection and SCR catalyst Sweeping unit Disc brush diameter/speed approx. Brush material Sweeping width 120 kW (163 hp), 4,455 cm³ displacement, six cylinders, 500 Nm at 1,400 rpm 900 mm, max. 140 rpm polypropylene, steel or mixed material 2,200 mm Sweeping width with third brush Water tank volume approx. Water spray system Speeds Tare weight Total permissible weight up to...

Open the catalog to page 14

All AEBI SCHMIDT HOLDING AG catalogs and technical brochures

  1. AS 660

    4 Pages

  2. VKS

    4 Pages

  3. ACE

    7 Pages

  4. FS 110 T

    4 Pages

  5. SNK 55.1

    4 Pages

  6. Tarron MS

    6 Pages

  7. TJS / TJS-C

    8 Pages

  8. CJS

    5 Pages

  9. CJS-DI

    5 Pages

  10. FS 110 T

    4 Pages

  11. Snow ploughs

    24 Pages

  12. eSwingo 200+

    20 Pages

  13. Swingo 200+

    16 Pages

  14. Multigo 150

    12 Pages

  15. EC 170 / 130

    4 Pages

  16. Combicut

    20 Pages

  17. Aebi BM 8

    20 Pages

  18. Jet Sweepers

    28 Pages