ADVANCED NAVIGATION SPATIAL FOG FOG GNSS/INS Spatial FOG is a ruggedised GPS aided inertial navigation system and AHRS that provides accurate position, velocity, acceleration and orientation under the most demanding conditions. It combines ultra high accuracy accelerometers, magnetometers and a pressure sensor with an RTK GNSS receiver. These are coupled in a sophisticated fusion algorithm to deliver accurate and reliable navigation and orientation. Heave : 2 % or 0.02 m (whichever is greater) PERFORMANCE 0.01 ° Roll and Pitch 0.05 ° Heading FEATURES EXTREME INERTIAL PERFORMANCE Spatial FOG contains the KVH Industries 1750 fiber optic gyroscope (FOG) IMU, which provides extremely accurate inertial data far beyond the best MEMS technology available. This allows Spatial FOG to acheive very high accuracies and dead reckon without GNSS for extended periods of time. Despite the high accuracy FOG IMU, Spatial FOG has a very competitive price tag that is lower than many MEMS systems on the market. ADVANCED FILTER Spatial FOG contains Advanced Navigation's revolutionary sensor fusion filter. The filter is more intelligent than the typical extended kalman filter and is able to extract significantly more information from the data by making use of human inspired artificial intelligence. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. RELIABILITY Spatial FOG has been designed from the ground up for mission critical control applications where reliability is very important. It is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance in place. The hardware is protected from reverse polarity, overvoltage, surges, static and short circuits on all external interfaces. The GNSS contains RAIM, which excludes both malfunctioning, and tampered satellite signals. Spatial FOG contains a secondary MEMS IMU, which it uses to detect faults with the primary IMU. RTK GNSS RECEIVER Spatial FOG contains a triple frequency Trimble RTK GNSS receiver that provides up to 8mm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO and BeiDou. Spatial FOG supports both real time RTK positioning and logging of raw satellite data for kinematic postprocessing. HIGH UPDATE RATE Spatial FOG's internal filter runs at 1000Hz and data can also be output at this rate over high speed RS232 or RS422. This allows for control of dynamically unstable platforms. PERIPHERALS Spatial FOG features two general purpose input output pins and two auxiliary RS232/RS422 ports that support an extensive number of peripherals. Including odometer based input for ground vehicles, DVLs and USBLs for underwater navigation, NMEA input/output and more. For an integration fee, custom peripheral devices can be added.

HOT START Spatial FOG contains a next generation battery backup system that allows it to hot start inertial navigation from its last position in 2 seconds and obtain a GNSS fix in approximately 3 seconds. The battery backup system lasts for the lifetime of the product and will provide backup for 48 hours without power. Advanced Navigation's Spatial series are the only GNSS/INS in the world to provide hot start inertial navigation. RAPID NORTH SEEKING GYROCOMPASS Spatial FOG features a revolutionary north seeking algorithm that is able to provide accurate heading in as little as 10 seconds after...