CERTUS MEMS GNSS/INS
2Pages

ADVANCED NAVIGATION CERTUS MEMS GNSS/INS ICertus is a ruggedized miniature GPS aided inertial navigation system and AHRS that provides accurate position, velocity, acceleration and orientation under the most demanding conditions. It combines temperature calibrated accelerometers, gyroscopes, magnetometers and a pressure sensor with a dual antenna RTK GNSS receiver. These are coupled in a sophisticated fusion algorithm to deliver accurate and reliable navigation and orientation. PERFORMANCE 0.1 ° Roll and Pitch 0.1 ° Heading © 8 mm RTK Positioning (H' 3 °/hr MEMS Gyroscope @ 1000 Hz Update Rate © 2000 g Shock Limit MULTI CONSTELLATION RTK Certus contains a dual frequency RTK GNSS receiver that provides up to 8mm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. MULTI-PROTOCOLS AND INTERFACES Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. ADVANCED FILTER Certus contains Advanced Navigation's revolutionary sensor fusion filter. The filter is more intelligent than the typical extended kalman filter and is able to extract significantly more information from the data by making use of human inspired artificial intelligence. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. DUAL ANTENNA HEADING Certus features dual antenna moving baseline RTK. This allows it to provide highly accurate heading while both stationary and moving. It is an excellent choice for applications where magnetic heading is not usable due to interference or where additional accuracy is required. An added benefit is the ability to accurately measure vehicle slip angle. CALIBRATED DYNAMIC RANGING SENSORS Certus contains very high performance MEMs inertial sensors. These are put through Advanced Navigation's intensive calibration process to increase their performance further still and provide consistently accurate data over an extended temperature range of -40°C to 85°C. Advanced Navigation's custom calibration process is the only full sensor calibration that can provide dynamic ranging, allowing the user to select a sensor range for high accuracy or high accelerations on the fly. As part of this calibration, every Certus unit spends 8 hours in our specially built rotating temperature chamber. RELIABILITY Certus's precision marine grade aluminium enclosure is waterproof and dirtproof to the IP67 standard and shockproof to 2000g, allowing it to be used in the most extreme conditions. A sophisticated venting system allows the unit to measure air pressure whilst keeping water out. Its minimal size, weight and power requirements allow for easy integration into almost any system. The hardware is protected from reverse polarity, overvoltage, surges, static and short circuits on all external interfaces. The GNSS contains RAIM, which excludes both malfunctioning, and tampered satellite signals.

TIME SYNCHRONISATION Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. EMBEDDED USER INTERFACE Certus features a rich, responsive embedded web interface that provides full access to all of the device's internal functions and data. NAVIGATION Horizontal Position Accuracy 1.2 m Vertical Position Accuracy 2.0 m Horizontal Position Accuracy (with SBAS) 0.5 m Vertical Position Accuracy...