Innovation in Aerospace Manufacturing & MRO Fast Accurate Alignment - Now with, or without, pilot holes The DAS335-3 Drill Alignment System has been developed to allow a single operator to accurately locate, drill and counterbore a close to edge hole precisely aligned with a target obscured by overlying materials in a single shot operation. The DAS335-3 system is supplied with an alignment target, single channel target controller, charger unit and a ruggedised storage case. A target transmitter may be placed either in an existing pilot hole in the substructure or permanently fitted to removable, or fixed, jigs. Uniquely, the DAS335-3 Drill Alignment System can have multiple targets located close together, substantially increasing drilling efficiencies. This means that it is possible to remove the need for pilot holes in the substructure, eliminating a time consuming process and eradicate costly drilling concessions. The DAS335-3 is simple and quick to align using the mechanical joystick integrated into the vacuum mounting accessories. The system indicates when alignment is achieved, removing all operator subjectivity from the drill alignment process. The DAS335-3 is used with an industry standard automatic drill with a 35mm concentric collect drill. (other sizes are available) A variety of mechanical and vacuum attachment accessories are available, as well as compact portable vacuum pumps. The DAS335-3 is self contained, rugged and, when coupled with a 12-month calibration period, provides a low through-life cost of ownership.

Voyager, Chicago Ave, Manchester Airport, Manchester, M90 3DN, UK Tel:+44 (0)161 436 8822 www.aaiaerospace.co.uk