Materials Testing Systems Foam Testing Systems Configured to Perform ASTM D3574 and ISO Standardized Tests

Materials Testing Systems eXpert 5603F Static Foam Testing System The eXpert 5603F Foam Testing System includes everything needed to perform the ASTM D3574 static tests and the equivalent ISO tests on urethane foam. The dual-column system, capable of speeds up to 508 mm/min (20 in/min), is designed for sample block sizes as large as 24 in x 24 in. Our standard package includes a perforated lower base plate and swivel jointed upper platen per ASTM requirements. Included with the machine is the MTESTQuattro PC-based control system equipped with the following test procedures that can be easily accessed...

eXpert 5952F Fatigue Foam Testing System ADMET's eXpert 5952F series fatigue foam testing machine can perform all the tests that eXpert 5603F can in addition to the Constant Force Pounding test specified under ASTM D3574 Test I3. With a maximum speed of 15,240 mm/min (600 in/min) and fatigue rated components, the dynamic force actuator exceeds the ASTM D3574 speed and cycle requirements. Operators may choose the eXpert 5952F to perform the following tests: • ASTM D3574- Test I3 / ISO 3385: Dynamic Fatigue Test by Constant Force Pounding (CFP) • ASTM D3574- Test M: Recovery Time • ASTM D3574-...

System Specifications ADMET►- Model Foam Test Standard 1. Vertical Test Space is the distance from the top surface of the base platen to the bottom surface of the moving crosshead, excluding load cell, grips and fixtures. Larger openings can be accommodated by ordering an extended column frame. Load Measurement Accuracy: +/- 0.5% of reading down to 1/100 of load cell capacity. Meets or exceeds ASTM E4, BSENIS 7500-1: 2004, DIN 51221 and JIS B7721 standards. ADMET self-identifying load cells are offered with all systems. Strain Measurement Accuracy: +/- 0.5% of reading down to 1/50 of full scale...