Six-around-One Cable, 600Volt XHW-2 Insulated Conductors, 400Hz
2Pages

Six-around-One Cable, Six-around-One Cable, 600Volt XHHW-2 Insulated 600Volt XHHW-2 Insulated Conductors, 400Hz Conductors, 400Hz Used to to distribute400Hz electrical three phase Used distribute 400Hz electrical three phase power within aluminumor PVC conduit power within aluminum or PVC conduit Application: Application: Description: Description: This specification covers six-around-one cable, This specification covers retardant cross-linked polysix-around-one cable, insulated with flame insulated with flame retardant cross-linked polyethylene, (XHHW-2). The conductors are type ethylene, (XHHW-2).standard 44, are manufactured in XHHW-2 per UL The conductors are type accordance with NEC article 310 and comply in XHHW-2 per UL standard 44, are manufactured in all respects with ICEA and 310 standards. accordance with NEC articleNEMA and comply in all respects with ICEA and NEMA standards. Construction data and specifications: Six-around one cable is for 600v operations where the Six-around one cable is for 600v operations where th maximum operating temperature does not exceed 90 maximum wet or dry temperature does general degrees C inoperating locations. XHHW-2 is a not exceed 9 degrees C in wet and locations. XHHW-2 is a purpose building wireor dry its physical and electrical genera purpose building wire and its physical and electrica properties make it an excellent product for installation in duct or conduit, underground and where moisture installation properties make it an excellent product for may accumulate. duct or conduit, underground and where moisture ma Conductors; and specifications: Construction data The conductors consist of uncoated soft solid, solid or stranded copper meeting the require- ments of ASTM B3. Unless otherwise specified, Class B stranding will be supplied. The stranding meets the re- quirements conductors consist of uncoated soft solid, solid or compacted copper conductors. Conductors; The of ASTM B8 for concentric compressed or B496 for concentricstranded copper meeting the require ments of ASTM B3. Unless otherwise specified, Class B stranding will be supplied. The stranding meets the re Insulation; The B8 for concentric compressed or polyethylene (XLP), extruded concentrically over the quirements of ASTMinsulation is flame retardant cross linkedB496 for concentric compacted copper conductors. conductor to the wall thickness, as specified by UL44 for type XHHW-2 conductors. ICEA S-66-524/NEMA WC7 and ICEA S-95-658/NEMA WC70. Insulation in black is UL listed as sunlight resistant. VW-1 flame retardant Insulation; The insulation is flame retardant cross linked polyethylene (XLP), extruded concentrically over the cross-linked polyethylene (XHHW-2 insulation is available upon request. conductor to the wall thickness, as specified by UL44 for type XHHW-2 conductors. ICEA S-66-524/NEMA WC 7 and ICEA S-95-658/NEMA WC70. Insulation in black a suitable marking on each insulated conductor of Conductor coding; Phase identification is provide by is UL listed as sunlight resistant. VW-1 flame retardan multi polyethylene (XHHW-2 insulation is available upon request. cross-linked conductor cable Assembly; The required number of six Conductor coding; Phase identification is insulated conductors will be twisted with a suitable left conductor o provide by a suitable marking on each insulated hand lay around a center insulated conductor per ICEA-NEMA specifications. An optional PVC jacket can be multi conductorover the multi conductor assembly. Tests; The finished wire will meet all test requirements as extruded cable specified by ICEA S-66-524/NEMA WC-7, ICEA S-95-658/NEMA WC70 and UL44. VW-1 flame retardant cross-linked polyethylene. Assembly; The required number of six insulated conductors will be twisted with a suitable left hand lay around a center insulated conductor per ICEA-NEMA specifications. An optional PVC jacket can be extruded over the multi conductor assembly. Tests; The finished wire will meet all test requirements a specified by ICEA S-66-524/NEMA WC-7, ICEA S-95-658/NEMA WC70 and UL44. VW-1 flame retardan cross-linked polyethylene. www.pageindustries.com Toll Free 1-855-465-PAGE (1-855-465-7243) Phone Fax Email sales@pageindustries.com P 1-707-469-7243 USA 1-707-469-7244 Fax Email sales@pageindustries.com hone Vacaville, CA 95688 400Hz Distribution Wire, Typical Construction

Single Conductor Ground jusuaity supplied by installer • 'in 7C bundles: core becomes the neutral (N) conductor Part Number Each Conductor Insulation Each Conductor in Mils Approximate O.D. Each Conductor in Inches Approximate O.D. 7-Conductor Assembly in Inches The above data is approximate and subject to normal manufacturing tolerances. Standards: Conductors are Listed by UL as Type XHHW-2 per Standard 44. Conforms to ICEA S-66-524/NEMA WC-7 Crosslinked Thermosetting Polyethylene Insulated Wire and Cable. Conforms to ICEA S-95-658/NEMA WC70 Nonshielded 0-2KV Cables. When identifying...