*myaeroexpo

RELIANCE

Product catalog summary

Compliance with Standards:
The RELIANCE™ Approach Flash System complies with FAA EB 67D, ICAO Annex 14, Vol. I, IEC TS 61827, and NATO STANAG 3316 standards.

Uses:
The system uses LED lights for approach sequential flash and threshold identification for CAT I, II, and III operations.

System Design:
The system consists of a control unit, main chain (lights 1-30), threshold identification (lights 31-32), and power distribution units (1-32). It supports various configurations, including full or reduced main chain with or without threshold identification lights (TIL).

Features and Benefits:

Dynamic system configuration and operation modes with three brightness levels (100%, 10%, 3%).
Flash frequency options of 2 or 1 Hz.
Single light monitoring, even in standby mode.
Overvoltage and lighting current protection.
Multiple remote control interfaces, including RS-485 MODBUS/RTU, Ethernet MODBUS/TCP, PROFIBUS DP, and CANBUS.
Service local control via a comfort control panel and lucDMC Service Software.

Technical Specifications:

Control Unit (MCU800D-SFL): 400 VAC, 3 Ph., 50/60 Hz, IP 43, -25 to +45 °C operating temperature.
Power Distribution Unit (PDU800D-SFL): 400 VAC, 50/60 Hz, IP 68, -40 to +55 °C operating temperature.
Flashing Light (SFL or TIL): 36 VAC, 50/60 Hz, IP68, -25 to +85 °C operating temperature.

Ordering Information:
Various configurations and accessories are available, including different connectors, control units, and optional overvoltage protection.

Notes:
Installation parts are not included in the delivery and are the responsibility of the installer. Refer to the manual for more details.

Catalog excerpts

RELIANCE Approach Flash System Elevated and inset Compliance with Standards • Dynamic system configuration by parameter setting • Dynamic operation mode in 3 brightness steps (100%, 10% and 3%) • Flash frequency switchable between 2 or 1 Hz • Single light monitoring even in standby mode • Optional lights with high intensity • Service local control at control unit possible • Comfort control panel for service local control • lucDMC Service Software LED light used for approach sequential flash and threshold identification for CAT I, II and III operations • Over voltage and lighting current protection of power and data lines • 1× parallel remote control interface (default) System Design • 2× serial remote control interface (redundant) with RS-485 MODBUS / RTU (optional) The RELIANCE™ Approach Flash System, referred to as SFL, consists of a control unit, main chain (SFL - light 1..30), threshold identification (TIL - light 31..32) and power distribution units (1..32). • Optional remote control interface with Ethernet MODBUS/TCP or PROFIBUS DP (optional) The RELIANCE SFL system enables following static (installation) or dynamic (configuration settings) system configurations: • Optional CANBUS interface (proprietary protocol for RELIANCE control system) • Full main chain with/without TIL (light 1..32) • Light power supply with SELV • Reduced main chain with/without TIL (light 1..20 + 31..32) • EMI (Electro-Magnetic Interference) filter to harmonize power fluctuation • TIL without main chain (light 31..32) Elevated, single inset or double inset lights available for installation.

Open the catalog to page 1

SFL System Layout 32 Systemaufbau System Layout m Überspanuungs -schutzeinheit Steuereinheit Control Unit Over Voltage Protection Unit Remote Control Local Control Farbcode für Kabel Colour Code for Cable Kabel / Cable: NYY-O Ader / Wire Farbe / C ol our - -- - -- - -- - -- - --------------------------------1 blau / blue 2 braun / brown 3 schwarz / black 4 grau / grey Kontaktbelegung / Wire Connection Buchse / Receptacle Stecker / Plug weiss / white rot / red sc hwarz / black braun / brown SELV Power Supply for SFL Kabelmuffe Cable Joint Ader / Wire Farbe / Colou r - -- - -- - -- - -- - -------------------------------a...

Open the catalog to page 2

Power Distribution Unit (PDU800D-SFL) Power supply Power circuit Primary circuit: 400 VAC, 50/60 Hz Primary circuit: 36 VAC (SELV) Power consumption ~1.4 kVA, asymmetric load, main load at L1/L2 Power supply Control voltage 24 V from the cabinet Internal fuse automat 10A fuse characteristic K Data communication Primary circuit: Powerline Primary circuit: Powerline (SELV) Communication interface remote control 1× parallel remote control interface (default) 2× serial remote control interface (redundant) with RS-485 MODBUS / RTU (optional) Optional remote control interface with Ethernet MODBUS/TCP...

Open the catalog to page 3

In-Pavement Flasher Elevated Flasher 12″ shallow base and deep base can with transformer shown for complete view only but not part of the flash light. These articles can be ordered separately from accessory. Base plate and frangible pedestal are not shown and are not part of the flash light. These articles can be ordered separately from accessory. 148.3

Open the catalog to page 4

Control Cabinet and Software Ordering Information Ordering Code Single Profibus Redundant Profibus Single Ethernet Redundant Ethernet lucDMC + License Dongle for 1 PC lucDMC + License Dongle for 2 PC lucDMC + License Dongle for 3 PC lucDMC + License Dongle for 4 PC lucDMC + License Dongle for 5 PC Dongle For Inset Lights Power Supply Unit Mains Filter In-Pavement and Elevated Flasher Ordering Information Ordering Code 1 Elevated Cold/W - FAA Connector + receptacle 2 Elevated Cold/W - Phoenix Connector + receptacle Elevated Cold/W - Phoenix Connector + Receptacle + FAA-lead (connector + receptacle)...

Open the catalog to page 5

Transformer, Connection, and Mounting Ordering Information Ordering Code SELV Isolating Unit Optional Overvoltage Protection Optional Remote Monitoring for Data Line Overvoltage Protection Phoenix Connector Plug (QPD Nut included) Phoenix Connector Receptacle (QPD Nut included) Phoenix Dustcap to seal off unused connections Phoenix Nut (To reuse Plug or Receptacle) FAA 4 pole Cable Lead Plug FAA 4 pole Cable Lead Plug - 280 mm FAA 4 pole Cable Lead Receptacle FAA 4 pole Cable Lead Receptacle -2000 mm FAA 5 pole Cable Plug FAA 5 pole Cable Plug - 300 mm FAA 5 pole Cable Receptacle FAA 5 pole Cable...

Open the catalog to page 6

All ADB SAFEGATE catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list