video corpo

IUL-L LED In-pavement Utility & Heliport Perimeter Light
2Pages

{{requestButtons}}

Catalog excerpts

IUL-L LED In-pavement Utility & Heliport Perimeter Light - 1

IUL-L LED In-pavement Utility & Heliport Perimeter Light Compliance with Standards FAA: Manufactured to applicable L-852T(L) requirements in FAA AC 150/5345-46 (Current Edition) and the FAA Engineering Brief No. 67. Ordering Code Uses • Heliports with constant voltage sources - Yellow for military and existing civilian applications - Green for new civilian applications - Used as boundary marking of final approach and takeoff (FATO) areas, touchdown and lift-off (TLOF) areas, and aprons - Also used for taxiway edges and aiming points • Gate security • Under vehicle inspection illumination • Used for a variety of special applications where a balance of vertical and horizontal light output is required • Provides essential lighting for the protection of fixed installations and other potential targets • Used in high security areas to assist detection of bombs and smuggling, in maintenance facilities to spot vehicle damage, and to protect entrances to security areas • Fixture layout/quantity can be designed for individual and/or pattern control to enable use of alternate traffic patterns LED Color 1 = White 2 = Yellow 3 = Green 4 = Blue 5 = Red Mounting 1 = 12-inch fixture for L-868 light base 2 = 12-inch fixture for L-867 light base 3 = 8-inch fixture for 8-inch light base Light Beam Direction 1 = Upward light pattern 2 = Omnidirectional light pattern1 Arctic Option 0 = Without arctic option 1 = With arctic option2 Notes Fixture supplied with only L-823 style male connector. To ensure wire entry is waterproof, a secondary connector kit (Part No. 70A0046) is required for installation. 1 Heliport light pattern 2 When powered by a parallel circuit, heater is designed for use at only 120 VAC, ±10%, 50/60 Hz Features • Operates over a wide input voltage range of 95-264 VAC, 50/60 Hz Features (Continued) • Light output stays constant regardless of input voltage level • LED photometric performance will be maintained longer due to a cleaner lens. The lower temperature of the lens prevents the “baking effect” that causes contaminants to stick to the surface of the lens. • Average LED life of 100,000 hours • Low profile – < 0.25 inch above ground, which reduces vibrations caused by vehicles, increasing fixture life • IUL with arctic option (U.S. Patent 7192155 B2) uses a thermostatically controlled heater to prevent ice and snow buildup from obscuring light output. Melts ice similar to traditional incandescent fixtures. • No batteries to replace – Constant, dependable level of light at all times, comparable to FAA-specified medium intensity light levels • Integral third-wire grounding for fixture and installation base cans • Thermostatically controlled heater cycles on and off when temperature drops below freezing, reducing overall energy consumption • Standard FAA-Style L-823 connectors provide a complete environmental seal, eliminating fluid “siphoning” up wiring to fixture interior • High strength – Rugged, proven design - fixture originally designed to withstand the rollover weight of large aircraft in airport movement areas • Equivalent mechanical and electrical design has been field tested in thousands of airfield installations • Offers longer maintenance intervals and requires fewer spare parts, resulting in lower life cycle costs • Designed and built with simplicity and ease of maintenance in mind • Can be provided with a shallow mounting base designed for inpavement installation • Aluminum alloy cover, inner cover, and optical assembly, stainless steel hardware, and a hardened optical glass lens • Fixture is also av

Open the catalog to page 1
IUL-L LED In-pavement Utility & Heliport Perimeter Light - 2

Spare Components Operating Conditions 8-inch Load Bearing Base Can Part Number 88ICC05Y Input voltage 1 Either a 40 W (VA) or 54 W (VA) lamp is in typical equivalent fixtures Temperature: -40 °C to +55 °C (-40 °F to +131 °F) Altitude: Sea level to 10,000 feet (3000 m) Relative Humidity: Up to 100% Description Cord set Inner pan assembly, 95-264 V, yellow Inner pan assembly, 95-264 V, blue Inner pan assembly, 95-264 V, green, white LED optical assembly, white, omnidirectional light pattern, w/out heater LED optical assembly, white, omnidirectional light pattern, with heater LED optical...

Open the catalog to page 2

All ADB SAFEGATE catalogs and technical brochures

  1. Ace3

    3 Pages

  2. Aglas

    6 Pages

  3. Optamos

    4 Pages

  4. One control

    4 Pages

  5. Infomax

    4 Pages

  6. Diflis

    4 Pages

  7. Declos

    4 Pages

  8. Acemax

    4 Pages

  9. FAP

    3 Pages

  10. ALSF-SSALR

    6 Pages

  11. SYS 800D-S

    6 Pages

  12. SL-AC-AS-I

    2 Pages

  13. BPE

    4 Pages

  14. LEAP

    4 Pages