- Catalogs
- AB-Tec GmbH & Co.KG
- TecWeb® Product Overview
TecWeb® Product Overview
TecWeb® Product Overview
TecWeb® products are available in various polymer formulations, weights, roll widths, and characteristics. Custom product engineering solutions can be requested.
Product Details
- ABA Co - Polyamide: Melting range of 105 – 125°C, heat resistance of 85 – 125°C, steam activatable, plasticizer migration resistance, wash resistance, and HF weldable. Notable for high chemical stability and oil resistance.
- ABE Co - Polyester: Melting range of 90 – 140°C, heat resistance of 80 – 130°C, plasticizer migration resistance, and HF weldable. Suitable for bonding a variety of substrates including PVC.
- ABO Co - Polyolefins: Melting range of 90 – 120°C, heat resistance of 80 – 95°C. Known for being efficient, effective, and versatile adhesives.
- ABX Ternary: Melting range of 115 – 170°C, heat resistance of 120 – 160°C, plasticizer migration resistance, wash resistance, and HF weldable. Designed for aggressive adhesive requirements.
Application Recommendations
TecWeb® products require approximately 24 hours to achieve full bond strength after lamination. Testing, including washing and cleaning, should be conducted only after this period.
Contact Information
AB-Tec GmbH & Co. KG, Baarstr. 110, D-58636 Iserlohn, Tel.: +49 2371 2195525, Fax: +49 2371 2195527, Email: [email protected], Website: www.ab-tec.com
Catalog excerpts
TecWeb® Produkte in der Ubersicht TecWeb® Product Overview TecWeb® Produkte sind in einer Vielzahl von moglichen Polymeren, Gewichten, Breiten und spezifischen Eigenschaften lieferbar. Anwendungsspezifische Produktentwicklungen sind auf Anfrage moglich. TecWeb® products are available in a wide range of polymer formulations, weights, roll widths and characteristics. Custom - made product engineering solutions are available on request. TecWeb® benotigt ca. 24 Stunden, um nach der Laminierung seine endgultige Trennfestigkeit zu erreichen. Waschtests und Reinigung sollten dementsprechend erst nach 24 Stunden erfolgen. TecWeb® needs approx. 24 hours to fully gain its final bond strength after lamination. Therefore any testing should not be carried out earlier than 24 hours after lamination. cq O Q AB-Tec GmbH & Co. KG • Baarstr. 110 • D-58636 Iserlohn • Tel.: +49 2371 2195525 • Fax: +49 2371 2195527 • [email protected] • www.ab-tec.com
Open the catalog to page 1