カタログ >
ZWICK GMBH & CO. KG >
Robotic Testing System ‘roboTest H’ for Pendulum Impact Tester HIT25/50P

Robotic Testing System ‘roboTest H’ for Pendulum Impact Tester HIT25/50P
1 / 2ページ

カタログの抜粋

Robotic Testing System ‘roboTest H’ for Pendulum Impact Tester HIT25/50P - 1

Zwick Materials Testing H' for Pendulum Impact Tester Zw/ck / RoellProduct Information Robotic Testing System ‘roboTest HIT25/50P Application The robotic testing system ‘roboTest H' is used for automatic impact tests at ambient temperature or on temperature-conditioned Charpy or Izod specimens. System configurations • HIT25P (25 J) or HIT50P (50 J) pendulum impact tester with motorized pendulum return and safety housing • Instrumented or non-instrumented pendulums according to the standard with nominal energy from 0.5 Joule up to 50 Joule • ‘roboTest H' robotic testing system with tempering magazine for up to typically 20 specimens • Industrial controller with testXpert® testing software and autoEdition2 automation software Advantages of the ‘roboTest H’ testing system • Specimen gripper ensures the specimen is transported securely and reliably to the pendulum impact tester support within 5 seconds. • Alignment of specimens on the support and initiation of the test are always performed automatically. • With instrumented testing the fracture mode (complete, partial, hinged and non-break) can be detected automatically as an option. • Manual tests are still possible by simply removing the robotic testing system. • Optional accurate specimen temperature measurement via thermo-couple • Simple, convenient operation of the robotic testing system via testXpert® testing software is unaffected by automation. • Safe operation of the testing system via 100% CE-compliant construction is guaranteed in accordance with the latest machinery directive. • Adding this roboTest H-system to an existing HIT25/ 50P with pendulum repositioning is possible without problems. Advantages of a robotic testing system • A high reproducibility of the test results is obtained because operator influences are excluded (hand temperature, moist hands, eccentric or inclined insertion of specimens etc.). • Qualified laboratory staff is relieved of routine jobs and is thus available for more complex activities. • The machine can be used during idle times (e.g. breaks) thus increasing the rate of utilization and allowing „quicker“ results.

カタログの1ページ目を開く

Robotic Testing System ‘roboTest H’ for Pendulum Impact Tester HIT25/50P - 2

Product Information Robotic Testing System ‘roboTest H’ for Pendulum Impact Tester HIT25/50P Technical data Mechanical Magazine capacity without pendulum impact tester, without table Supply requirements Electrical supply Power consumption Mains frequency Compressed air Compr. air requirement Fig 2: ‘roboTest H’ test area viewed from above Control Automation Test sequence Peripheral connection Manual preparation Test Type of test • Manual measurement of the specimen dimensions and the remaining width in the notch. • Up to 20 specimens are inserted in a magazine slidecarrier into the...

カタログの2ページ目を開く