
カタログの抜粋

Base machine Specifications, speed, acceleration Speed, acceleration repeatability 1) position accuracy 1) floor load requirements interface operating temperature max. rotation speed T-axis relative humidity beam height electrical requirements max. material weight max. rotation acceleration T-axis 30/60/120 mm / 1.1/2.3/4.7“ AC 3ph+N+GND, 208/400 V, 50/60 Hz, 32 A 30 kg/m² / 6 lbs/ft² (manual loading) (can affect the evenness of the working surface) X/Y drive system, static, at constant operating temperature (may vary depending on cutting tool/method). Noise levels may vary between <75 dB(A) and ~85 dB(A) depending on ambient conditions and type of cutting technology, materials, and vacuum generator being used. 120 mm / 4,7” beam height available only for cutter sizes L-3200, XL-3200. Depending on cutter size, modules.
カタログの1ページ目を開く
Technical Data G3 Base machine Dimensions, weight, material Overall dimensions, incl. workstation (B x A) Machine weight max. materialwidth cutter with static work surface max. materialwidth cutter with material transport
カタログの2ページ目を開く
Technical Data G3 Cutter with light curtain and static work surface Dimensions, material Overall dimensions, incl. workstation (B x A)
カタログの3ページ目を開く
Technical Data G3 Cutter with light curtain and material transport Dimensions, material Overall dimensions incl. workstation (A + 2X) × C Zünd Systemtechnik AG Industriestrasse 8 ∙ CH-9450 Altstätten ∙ T +41 71 554 81 00 ∙ in
カタログの4ページ目を開く