DVPL0505S
1 / 13ページ

DVPL0505S SeriesHIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION The DVPL series of high reliability DC-DC converters is operable over the full military (-55 °C to +125 °C) temperature range with no power derating. Operating at a nominal fixed frequency of 300 kHz, these regulated, non-isolated converters are optimized for low voltage point of load applications with high efficiency synchronous rectification, fast transient response, and power sequencing capability. These converters are designed and manufactured in a facility qualified to ISO9001 and certified to MIL-PRF-38534 and MIL-STD-883. This product may incorporate one or more of the following U.S. patents: 5,784,266 5,790,389 5,963,438 5,999,433 6,005,780 6,084,792 6,118,673 FEATURES • High Reliability • Operates From 5V or 3.3V Input • Adjustable Output Voltage, 0.8V to 3.4V • Up to 5 Amps or 16W Output • High Efficiency, Up to 97% • Output Voltage Sequencing • Output Voltage Tracking • Operation Into a Pre-Biased Output • Output Inhibit Control • Low Output Noise • NO Use of Optoisolators • Over Current and Short Circuit Protection • Precision Projection Welded Hermetic Package • Meets MIL-STD-461C and MIL-STD-461D EMC Requirements When Used With VPT DC-DC Converters and EMI filters • Additional Environmental Screening Available • MIL-PRF-38534 Element Evaluated Sales Information: Phone: (425) 353-3010 Fax: (425) 353-4030 E-mail: vptsales@vptpower.com

1. Dependent on output voltage. 2. Time for output voltage to settle within 1% of its nominal value, whichever is greater. 3. Derate linearly to 0 at 135°C. 4. Verified by initial electrical design verification. Post design verification, parameter shall be guaranteed to the limits specified. 5. With 100pF capacitor from Vin to Ground. 6. Vout not necessarily in regulation. 7. Correction factor of 0.12 added to ceramic capacitors.

UNDER VOLTAGE SHUTDOWN HOUSEKEEPING SUPPLY COMPENSATION NETWORK VOLTAGE TRACK CIRCUITRY q dim a O Voltage Track Figure 2 CONNECTION DIAG RAM 100uF

DVPL0505S Series TYPICAL DISTRIBUTED APPLICATION 1

DVPL0505S Series INTERNAL CONNECTION DIAGRAMS Figure 6 – Internal Inhibit Circuit and Recommended Drive Figure 7 – Internal Track Circuit (Shown with optional capacitor for turn-on delay) +VOUT Size B Date: File : 5 11- Aug-2 005 DELAY SLEWShe et of W:\unReleased VPT D rawings\..\D VPL Diagr ams2.Sch: Dra wn By Figure 8 – Track timing relations

OUTPUT VOLTAGE TRIM The output voltage is set with an external resistor connected from Trim pin to GND pin. This resistor must have a tolerance of 1% or less to achieve an accurate output voltage. The default output voltage with the TRIM pin left open is 0.80V. Figure 9 - Output Voltage Trim

EFFICIENCY PERFORMANCE CURVES (Tcase = 25°C, Full Load, Unless Otherwise Specified) Figure 11 - DVPL0505S Vin=3.3V Efficiency (%) vs. Output Current (A)

DVPL0505S Series EMI PERFORMANCE CURVES (Tcase = 25°C, Full Load, Unless Otherwise Specified) Emission Level [dBjjA] Emission Level [dBpA] Figure 14- 28V input line, DVMC, DVHE and DVPL, Cin=100jF

PACKAGE SPECIFICATIONS NUTES: 1. DIMENSIONAL LIMITS ARE ±0,005' UNLESS □ THERWISE STATED, 2. CASE TEMPERATURE IS MEASURED ON THE CENTER UE THE BASEPLATE, 3, MATERIALS: CASE: STEEL, GDLD □ VER NICKEL PLATED, CDVER: STEEL, NICKEL PLATED, PINS: CUPPER CDRED ALLOY 52 CO,O4O"0), ALLUY 52 (0,018*0), GULD OVER NICKEL PLATED, PIN SEALS: GLASS Figure 15 - Package and Pinout

DVPL0505S Series ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534) Test © Contact Sales for more information concerning additional environmental screening and testing options desired. © VPT I nc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer contract. @ 100% R&R testing with all test data included in product shipment. © Not required per MIL-PRF-38534. Test is performed for additional product quality assurance. © Non-QML products may not meet all...

ORDERING INFORMATION Notes: 1. Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products. 2. VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our sole discretion unless specifically forbidden by customer contract. Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental screening and testing, different input voltage, output voltage, power requirement, source inspection, and/or special element evaluation for space or...

SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS Do not use the DVPL0505S Series similar part number for SMD product acquisition. It is listed for reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMDs can be downloaded from the DLA Land and Maritime (Previously known as DSCC) website at https://landandmaritimeapps.dla.mil/programs/defaultapps.asp. The SMD number listed above represents the Federal Stock Class, Device Type, Device Class Designator, Case Outline, Lead Finish and RHA Designator (where applicable). Please reference the SMD for other screening...