UL390i
1 / 45ページ

{{requestButtons}}

カタログの抜粋

UL390i - 1

Illustrated Parts Catalogue

カタログの1ページ目を開く
UL390i - 3

Illustrated Parts Catalogue Please fill in your engine and aircraft details for further reference: Aircraft type Introduction Remarks The illustrations in this Illustrated Parts Catalogue show the typical construction. They may not represent in full detail or the exact shape of the parts which have the same or similar function. Modifications All efforts are made to ensure the accuracy of this Illustrated Parts Catalogue at the time of publication. ULPower, however, maintains a policy of continuous improvement of its products without imposing upon itself any obligation to install them on its...

カタログの3ページ目を開く
UL390i - 4

Illustrated Parts Catalogue

カタログの4ページ目を開く
UL390i - 5

Illustrated Parts Catalogue

カタログの5ページ目を開く
UL390i - 6

Illustrated Parts Catalogue

カタログの6ページ目を開く
UL390i - 7

Illustrated Parts Catalogue Cylinder Head Assembly Cylinder Head Right Cylinder Head Left Cylinder Head middle Valve Guide Exhaust Valve Seat Inlet Valve Seat Spark Plug Cylinder Head Washer Socket Cap Screw – M8x1x35 - 12.9 Steel Cylinder Head Plug Locking plate M4 bolt Hexagon head screw – M4x6 - 8.8 Steel - Zinc Plated Cylinder Head and Cylinder Valve Cover Socket Cap Screw – M5x10 - 8.8 Steel - Yellow Passivated Copper Sealing Ring ø8x12x1 Cylinder Head Oil Line Left Assembly Cylinder Head Oil Line Right Assembly Cylinder Gasket Cylinder Head Oil Filter Cloth braided hose Ø5,5 x Ø10,5...

カタログの7ページ目を開く
UL390i - 8

Illustrated Parts Catalogue (1) Apply Sealing Silicone - Elring No. 030.792 (2) Apply Loctite 243 (3) Apply Engine oil (4) Apply Loctite 542 (5) Quick gasket (Loctite 5910) (Outer dia Seal)

カタログの8ページ目を開く
UL390i - 9

Illustrated Parts Catalogue Crankcase, Oil Sump and Dipstick 1 Crankcase Left Thrust Bearing Mount Socket Cap Screw - M6x25 - 8.8 Steel - Yellow Passivated Copper Sealing Ring ø16x20x1.5 Hexagon Socket Screw Plug - M16x1.5 Copper Sealing Ring ø10x14x1.5 Stud Short Stud Long Crankcase Right Socket Cap Screw - M6x100 - 8.8 Steel - Zinc Plated Dipstick Tube Oil Pickup Tube with Filter Socket Cap Screw - M5x16 - 8.8 Steel - Yellow Passivated Socket Cap Screw - M6x16 - 8.8 Steel - Yellow Passivated Copper Sealing Ring ø14x20x1.5 Carter plug magnet M14x1,5 Copper sealing ring ø18x24x1.5 Oil...

カタログの9ページ目を開く
UL390i - 10

Illustrated Parts Catalogue

カタログの10ページ目を開く
UL390i - 11

Illustrated Parts Catalogue Socket Cap Screw - M5x16 - 8.8 Steel - Yellow Passivated Socket Cap Screw – M6x25 - 8.8 Steel - Yellow Passivated Copper Sealing Ring ø12x17x1.5 Hexagon Socket Screw Plug - M12x1.5 Pressure Relief Spring Copper Sealing Ring ø16xD20x1.5 Hexagon Socket Screw Plug - M16x1.5 (1) Apply sealing silicone – Elring No 030.792

カタログの11ページ目を開く
UL390i - 12

Illustrated Parts Catalogue

カタログの12ページ目を開く
UL390i - 13

Illustrated Parts Catalogue Camshaft and Valve Train Camshaft Gear Socket Cap Screw - M6x12 - 12.9 Steel Tappet Adjusting Screw Rocker Tappet Right Socket Cap Screw - M6x16 - 12.9 Steel Rocker Shaft Rocker Tappet Left Collet Valve Spring Lock Valve Spring Retainer Top Valve Spring Valve Stem Seal Valve Spring Retainer Bottom Inlet Valve Exhaust Valve (1) Apply loctite 266 (Loctite 26773) (3) Apply engine oil

カタログの13ページ目を開く
UL390i - 14

Illustrated Parts Catalogue

カタログの14ページ目を開く
UL390i - 15

Illustrated Parts Catalogue Crankshaft Bearing Set ( contains piece 2, 3 ) Crankshaft Bearing Half 1 Crankshaft Bearing Half 1 Thrust Bearing Thrust Bearing Disc Spring Thrust Bearing Retention Ring Prop Flange Drive Lug ø14 Propeller Flange Propeller Flange Propeller Flange Propeller Flange Prop Flange Bolt Locking propeller flange bolt Crankshaft Gear Connecting Rod Assembly Connecting Rod Bearing set (2) Socket Cap Screw - M8x1x35 - 12.9 Steel Piston -18cc (“I”engines) Piston -7cc (“iS” engines) Thrust Bearing Disc Thrust Bearing Retention Ring Outer Thrust Bearing Disc Spring Outer...

カタログの15ページ目を開く
UL390i - 16

Illustrated Parts Catalogue (1) Apply Sealing Silicone - Elring No. 030.792 (2) Apply Loctite 266 (Loctite 26773)

カタログの16ページ目を開く
UL390i - 17

Illustrated Parts Catalogue Inlet Collector Injector Holder +sensor holder Injector Holder + sensor holder ( Forced Cooling) Copper Sealing Ring ø12x17x1.5 Hose Clamp single use ø 47 Inlet Tube Right Inlet Manifold, Injectors and Throttle (Single ECU) Injector + Fuel Pressure Regulator Holder / Bypass Injector Holder Lock Plate Hex Head Screw - M5x16 - 8.8 Steel - Yellow Passivated Fuel Pressure Regulator - 3bar Retaining Ring - bore 36mm Inlet Tube Left Socket Cap Screw - M6x16 - 8.8 Steel - Yellow Passivated Fuel Pressure Regulator Hose (ø4.5x9.5 x 16cm) Copper Sealing Ring ø8x12x1...

カタログの17ページ目を開く
UL390i - 18

Illustrated Parts Catalogue Protection hose Fp-regulator Hose clamp single use Ø10 Nordlock washer Hex socket button head cap screw M4x8 -10.2 Zn Logo plaatje Copper sealing ring d10xD14x1.5 Fuel pressure sensor Overpressure valve Overpressure valve body hexagon flange bolt M8x50 Hexagon Socket Screw Plug M12x1,5

カタログの18ページ目を開く
UL390i - 19

Illustrated Parts Catalogue

カタログの19ページ目を開く
UL390i - 20

Illustrated Parts Catalogue

カタログの20ページ目を開く
UL390i - 21

Illustrated Parts Catalogue

カタログの21ページ目を開く
UL390i - 22

Illustrated Parts Catalogue Inlet Collector Injector Holder +sensor holder Injector Holder + sensor holder ( Forced Cooling) Copper Sealing Ring ø12x17x1.5 Hose Clamp single use ø 47 Inlet Tube Right Inlet Manifold, Injectors and Throttle (Double ECU) Injector + Fuel Pressure Regulator / Bypass Injector Holder Lock Plate Hex Head Screw - M5x16 - 8.8 Steel - Yellow Passivated Fuel Pressure Regulator - 3bar Retaining Ring - bore 36mm Inlet Tube Left Socket Cap Screw - M6x16 - 8.8 Steel - Yellow Passivated Fuel Pressure Regulator Hose (ø4.5x9.5 x 16cm) Copper Sealing Ring ø8x12x1 Throttle assy...

カタログの22ページ目を開く
UL390i - 23

Illustrated Parts Catalogue Protection hose Fp-regulator Hose clamp single use Ø10 Nordlock washer Hex socket button head cap screw M4x8 -10.2 Zn Logo plaatje Copper sealing ring d10xD14x1.5 Fuel pressure sensor Overpressure valve Overpressure valve body hexagon flange bolt M8x50 Injector (single hole) + sensor holder

カタログの23ページ目を開く
UL390i - 24

Illustrated Parts Catalogue

カタログの24ページ目を開く
UL390i - 25

Illustrated Parts Catalogue

カタログの25ページ目を開く
UL390i - 26

Illustrated Parts Catalogue Fuel line connection & feed line Fuel line side Fuel line cross short Banjo bolt M12x1.5 - double Copper sealing ring d12xD17x1.5 Fuel return line 2.6 – 3.9 Fuel lines

カタログの26ページ目を開く

ULPower Aero Engines N.V.のすべてのカタログと技術パンフレット

  1. UL520iS

    41 ページ

  2. UL350i

    41 ページ

  3. UL260i

    11 ページ

  4. UL260iS

    41 ページ