カタログ >
SMW-AUTOBLOK >
AN-D_AN-M_EN

AN-D_AN-M_EN
1 / 2ページ

カタログの抜粋

High precision power chucks Ø 125 - 400 mm INCH SERRATION METRIC SERRATION ■ Closed center ■ 2 and 3 jaws (4 jaws only Ø 400 mm) Application/customer benefits • For chucking parts • Suitable for vertical machines AN-D: Master jaws with INCH SERRATION (1/16” x 90°, 3/32“ x 90°) AN-M: Master jaws with METRIC SERRATION (1.5 mm x 60°) (suitable for japanese chuck top jaws) Technical features • Gripping force transmission via wedge hook • Sealed against swarfs and chips • Case hardened body to assure greatest precision and long chuck life Standard equipment Ordering example 2, 3 or 4 jaw chuck 1 set T-nuts with bolts 1 set soft top jaws Mounting bolts Actual gripping force diagrams 210 200 120 FG Gripping force (total on 3 jaws) (kN) FG Gripping force (total on 3 jaws) (kN) Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly. The data in the diagrams refer to 3 jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K05 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck. Technical data SMW-AUTOBLOK Type Axial piston stroke Recommended actuating cylinders Weight (without top jaws) * For internal clamping reduce the draw pull by 30%.

カタログの1ページ目を開く

Englisch High precision power chucks Ø 125 - 400 mm ■ Closed center ■ 2 and 3 jaws (4 jaws only Ø 400 mm) INCH SERRATION METRIC SERRATION ISO-A Direct mounting Subject to technical changes. For more detailed information please ask our customer service. SMW-AUTOBLOK Type Chuck open Jaw stroke

カタログの2ページ目を開く