カタログ >
Signalight >
Obstruction Light Controller

Obstruction Light Controller
1 / 7ページ

カタログの抜粋

Obstruction Light Controller +40 254 515 465 office@signalight.com 36 Lunca Street, Petrosani, Romania www.signalight.com

カタログの1ページ目を開く

EMC emission: EN55032 (CISPR32) Class B EN61000-3-2 Class A, EN61000-3-3, EAC TP TC 020 EMC immunity: EN61000-4-2,3,4,5,6,8,11 EN55024, light industry level, criteria A EAC TP TC 020 SR EN 61439-1: 2012 Low-voltage switchgear and controlgear assemblies Part 1: General rules SR EN 61439-2: 2012 Low-voltage switchgear and controlgear assemblies. Power switchgear and controlgear assemblies assemblies SR EN 60204-1: 2007 - AC: 2013 Safety of machinery Electrical equipment of machines - Part 1: General requirements Power source for obstruction lights used for marking obstacles, such as: towers,...

カタログの2ページ目を開く

AL - OBS - 19 - AX Series Indicator (Airfield Lighting) Category (Obstruction Lighting) Product Indicator Product Code 19 - Obstruction Light Controller Description of product type (accessory) Housing - powder-coated metal (gray) Cable gland - nickel plated brass The photocell is mounted on the front panel of the controller. The power supply controller is equipped with a test switch (this option is for medium intensity only). Temperature range: Degree of protection: Mechanical Characteristics

カタログの3ページ目を開く

Input voltage Output voltage 230VAC (90 - 305VAC, 47 - 63Hz complete range). max. 48VDC for Medium Intensity Obstruction Lights. 230 V AC for Low Intensity Obstruction Lights. Short circuit Over load Over voltage Surge protection EMI Filte Recommendation: Used cable for power up the obstruction lights must be at least 2,5 mm2. Electrical Characteristics Example: Controller for 4 pcs. Medium Intensity Obstruction Lights. Photo cell

カタログの4ページ目を開く

Options to consider before ordering: Flashing or steady (this option is for medium intensity only) Number of medium intensity obstruction lights that will be powered from controller. With or without monitoring and alarm system (this option is for medium intensity only). Types of beacons powered from the controller low and / or medium intensity obstruction lights (for low intensity - 230 V AC and optional the photocell can be incorporated in the fixture). An UPS can be added to the system to compensate for the lack of mains. The autonomy can be established depending on the system. The...

カタログの5ページ目を開く