BEACON
1 / 8ページ

+40 254 515 465 office@signalight.com 36 Lunca Street, Petrosani, Romania www.signalight.com

ICAO: Annex 14, Volume I - Aerodrome Design and Operations Annex 14, Volume II - Heliports IEC TS 61827: Electrical installations for lighting and beaconing of aerodromes. Characteristics of inset and elevated luminaires used on aerodromes and heliports Beacon lights Aiming Point Lights FATO Lights Approach Lights Taxiway Lights TLOF Lights Beacon Light Designed and built with simplicity and ease of maintenance in mind. High power LED technology. Lightweight, low-energy and environment friendly lighting fitting. Extensive use of aluminium alloys reduces fitting weight and eases handling in...

AL - 061 - 84 - WH Series Indicator (Airfield Lighting) Product Code Product Indicator LEDs Number (84 LEDs) LEDs Light Colour (cool white) Light fixture body - Powder coated aluminium RAL 1004 (aviation yellow) Dispenser - clear polycarbonate Cable gland - nickel plated brass Fasteners - stainless steel Light fixtures are provided with anti condensation valve. Light fixtures are UV protected. Temperature range: Degree of protection: Ka tested: Salt mist Light fixture body Mechanical Characteristics Polycarbonate disperser Diameter Total height Weight Fastening system Fastening system

5.5 Wh including the controller 140W including the controller 105W from controller Mains power drain Instant mains power drain Instant power drain Electrical Connections Electrical Characteristics 1. Controller 2. Beacon pre cabled 3. Flexible cable Power supply directly from controller with 3 core cable: V+ (Red) V - (Black) GND (Green / Yellow) The heliport beacon emit repeated series of equispaced short duration white flashes. Light flashing rate: letter H in morse code. Flash dura�on 0.5 — 2.0 milliseconds Photometric Characteristics The flash rate timing values complies with: ICAO...

100%, 10%, 3% with controller in 48VDC 360° White light Intensity level: Horizontal output: Light colour: Vertical elevation angle Photometric Characteristics Required minimum intensity [cd] ICAO requirement Minimum Light Intensity The brightness intensity values complies with : ICAO Annex 14 Vol.2 fig.5-11/1 The light colour emitted by the light fixture is white, with the trichromatic coordinates: 0.9 0.8 0.7 0.6 The measured trichromatic coordinates correspond to colour range requirements in: ICAO Annex 14 - Aerodromes Vol.1, fig. A1-1-1b. Colours for aeronautical ground lights (solid...

To order accessories please call our customer support. For contact details please refer to our website - www.signalight.com

M5*12 Stainless steal Allen Screw Polycarbonate disperser Silicone disperser gasket 2.9*6.5 Self tapping screw 1.5mm Aluminium disk Spare Parts 2.9*6.5 Self tapping screw Aluminium light fixture body Aluminium clamp Stainless steal washer M6*100 Stainless Steal hex head Screw Stainless steal cable gland

+40 254 515 465 office@signalight.com 36 Lunca Street, Petrosani, Hunedoara County, Romania www.signalight.com