6786 SERIES
1 / 5ページ

:!’ Sensata Technologies | 6786 SERIES -20°F to 350°F, Low Profile, Environmentally Sealed V2” Introduction KLIXON® 6786 low profile environmentally sealed 1/2" thermostats provide clean and positive switching action while being 60% shorter than Sensata's similar 1/2" hermetic thermostats. They are designed for use where maximum shock and vibration resistance is required and protection against dust and foreign particles is important. KLIXON® 6786 series thermostats provide rapid thermal response and a dependable circuit which makes them ideal for applications like magnetic transformers for particle accelerators, cryogenic pumps, and aircraft window glass heaters. Features • Environmentally sealed, low profile • Normally open or normally closed • Pre-set, non-adjustable calibration • Single pole, single-throw (SPST) • Max resistive load: 7 amp • Operating temperature range: -20°F to 350°F (-29°C to 117°C) • Ambient temperature range: -65°F to 400°F (-53.9°C to 204.4°C) • Many options available including solder type terminals in parallel or opposed alignments, brackets, studs, and with or without surface mounting brackets • UL recognized, file #E34618 (Go to UL online certifications directory web page) • Canadian-UL (UL File #34618) PERFORMANCE CHARACTERISTICS The standard 6786 utilizes silver contacts. Gold plated contacts can be furnished to assure reliable circuit switching under low wattage conditions. Copyright © 2018 Sensata Technologies, Inc.

Copyright © 2018 Sensata Technologies, Inc.

Copyright © 2018 Sensata Technologies, Inc.

Copyright © 2018 Sensata Technologies, Inc.

AGENCY APPROVALS & CERTIFICATIONS UL recognized, file #E34618 Canadian-UL (UL File #34618) WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE • The product’s side panels may be hot, allow the product to cool before touching • Follow proper mounting instructions including torque values • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH • Disconnect all power before installing or working with this equipment • Verify all connections and replace...