DOUBLE OCTOMILL™
1 / 2ページ

SECO SUMMARY FACE MILLING TWICE AS NICE DOUBLE OCTOMILL™ Optimized chip spacing Reduce cycle time and down time with the ability to rough and finish with one cutter, for a highly versatile and economical face milling solution. The Double OctomiU” features doublesided inserts with a total of 16 cutting edges, resulting in a dual combination of high performance and cost-effective milling operations. This cutter also has a coated, pre-hardened body to ensure tool life longevity, protecting it from wear and preventing chips from welding to it. RANGE OVERVIEW • 1.25” - 12.5” (25 - 500 mm) • Fixed and cassette • ONMU/ONEU 05 & 09 inserts • ONEU wiper capability • 16 cutting edges • Seco weldon, shell arbor and CAP mounting KEY BENEFITS • Roughing, semi-finishing and finishing operations • Higher feed rates • Less radial cutting forces • Robust inserts stand up to sticky or unstable materials • Fixed pocket & cassette cutters available DOUBLE-SIDED INSERTS PROVIDE 16 CUTTING EDGES Nickel coated body Center lock inserts, also wedge clamps for closed pitch Pins in cutter body for secure indexing Visit SECOTOOLS.COM for more

SECO PRODUCT SUMMARY FACE MILLING CASSETTE CUTTERS Modular and removable, the cassettes can be quickly and inexpensively replaced if damaged, avoiding the cost of replacing an entire cutter body. The cassettes use our advanced pin-locating technology to ensure fast, easy and precise insert positioning. Equally important, the cassette pockets allow adjustability to practically eliminate axial runout, while optimizing feed rates, surface inishes and tool life. MATERIAL GROUPS Steel P1-P11 Stainless Steel M1-M5 Cast Iron K1-K7 Superalloys S1-S3 INDUSTRY TARGETS • General Machining: This is a...