Ausschreibungstext AL602SF
1 / 5ページ

Tender specification text Product: Aluminium sliding/folding door Type: AL602SF electric Manufacturer: SCHNEIDER Technical design in accordance with the applicable standards and regulations for the protection of employees. Data given in the description are minimum requirements. Area of application: Door for industry and workshops, especially large doors. An accurately designed door for every requirement. A solid sliding/folding door contains virtually no wear parts so there are minimal maintenance and servicing costs. Cycles per day: approx. 50 Water tightness (EN 12425) Class 0-3 Air tightness (EN 12426) Class 0-3 Resistance to wind load (EN 12424) Class 2-5 U value approx. 3 (depending on the door infill) Operation: with electric drive General design: Aluminium sliding/folding door in self-supporting frame construction, door leaf consisting of screwed extruded hard aluminium profiles. Construction depth min. 60 mm, profile depth min. 87 mm. Filling with dual-wall construction elements (panels or glass). Running rail produced from hot-dip galvanised steel profile with downward opening, 3.6 mm wall thickness, dimensions 85 x 125 mm; 6.3 kg/rm with bolted seal carrier to partially cover the steel running rail (aluminium cover profile) with continuous sealing lip. Suspension of the door leaves by horizontal and vertical guided roller units. Plastic-covered track roller diameter 59 mm, Ø 59 mm per 2 track rollers for horizontal and vertical guide. Dust-proof, maintenance-free ball bearings. Lateral panels for deflection of the door leaves, by means of deflection brackets mounted on the door leaf, each with 3 pcs. ball bearings as guide roller. The parallel running U-guide rail guides the door leaf out of the baffles in a linear movement. Recessed hot-dip galvanised forklift rail (trafficable), with drainage connection piece for on-site drainage. Hinges 120 mm high, bolted to the frame by means of clamping plates (adjustable and exchangeable) with 20 mm stainless steel bolts and a dust-sealed thrust bearing between the hinged hinges. Hinged belts can be relubricated by means of grease nipples. Fixing of the panels with aluminium holding strips inside A6/CO anodised which are fixed in a groove provided on the frame by means of a rubber seal. Status as of 2020/07

Frame: Wall thickness of the profiles at least 2 mm aluminium. Profiles are connected to a frame element by means of dual M8 screw connections (no welded joints). The frame profiles are fixed with pressed-in aluminium parts (no connections with screw channels and self-tapping screws). Sealing and finger trap protection between the leaves with 50 mm leaf spacing made of EPDM material (PVC not permitted). Infill: Standard division up to 3200 mm 1 panel/leaf. Double-walled, insulated sandwich panel. Consisting of 1 mm hot-dip galvanised sheet steel on the outside and inside, fully bonded with...

Size: Mounting in front/in/behind the reveal: Outer frame height (max. 15.6 m): Outer frame height (max. 5.6 m): Leaf total (max. leaf width 1300 mm) Leaf arrangement: Number of fields with panel infill: Outer panels: Inner panels: Number of fields with glazing: Frame transom profiles: Running rail: Ground detail: Hot-dip galvanised floor guide Labour Miscellaneous Door in the sliding/folding door leaf: Pedestrian door built into sliding/folding door Profiles of the door as for the sliding door Ground sill profile max. 40 mm (special version with 10 mm possible) Door closer Dorma TS 92 with...

Special stainless steel version (washing boxes, sewage treatment plants, salt storage): Screwed connections and mounting bracket in stainless steel V4A Labour Miscellaneous POWER-SF sliding/folding door drive: Electromechanical sliding folding door drive Worm gear geared motor with integrated frequency converter mounted on the deflector panel. An HTD 8M toothed belt system 20 mm thick, is tensioned like a linear rack parallel to the running rail in an additional running rail and is steered by a toothed belt pulley mounted on the drive. The ball bearing mounted carrier connected to the...

Labour Miscellaneous Automatic closure surcharge: PLC PLC control in housing protection class IP65, integrated pushbutton OPEN-STOP-CLOSE, with main switch, Opening and closing in self-retaining mode, partial opening possible, with 2 leaves packages (left+right) can be operated individually, safety edge on the main closing edge and secondary closing edge, light barrier transmitter-receiver. Installation of the light barrier on one side 0.4 m for cars and 1.0 m for trucks. Automatic closing, termination of the open time after passage. 2 pcs. red traffic lights with LED luminaries for inside...