
カタログの抜粋

AquaSan Ni50 is a specially formulated, nickel based covered electrode with a waterproof coating for the welding of high strength steels with a Carbon Equivalent (CE) >0.4. AquaSan Ni50 is specified for welding base materials with a CE >0.4, which are susceptible to hydrogen embrittlement. Nickel has a high affinity for hydrogen and this composition allows hydrogen to diffuse into the weld metal and away from the high strength steel. STANDARDS - AWS A5.35: (pending initial publication). CHEMICAL COMPOSITION (NOMINAL) % Chemical composition (nominal) % C Si Mn Cr Ni Mo APPLICATIONS AquaSan Ni50 has been qualified for underwater welding of the following steel types to a maximum depth of 50 ft (15m): Grades: HY 80, HY 100, 204B, A36, 300 series stainless steels Datasheet updated 5/17/2018 3:59:38 PM (supersedes all previous editions) FORMS OF SUPPLY Packaging One 30 lb (13.5 kg) carton of AquaSan Ni50 electrodes includes 3 x 10 lb (4.5 kg) plastic containers. Each 10 lb plastic container includes 5 x 2 lb (0.9 kg) sealed plastic bags. WELD METAL CHARACTERISTICS Microstructure The all weld metal for AquaSan Ni50 has a fully Austenitic matrix. MECHANICAL PROPERTIES Temperature °C (°F) 20 (68) Proof strength, Rp0.2 MPa (ksi) 524 (76) Tensile strength, Rm MPa (ksi) 648 (101)
カタログの1ページ目を開く
Welding data Welding positions Datasheet updated 5/17/2018 3:59:38 PM (supersedes all previous editions) Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for Sandvik materials. www.smt.sandvik.com/contact-us SMT.SANDVIK.COM
カタログの2ページ目を開くSANDVIK MATERIALS TECHNOLOGYのすべてのカタログと技術パンフレット
-
APM 9980
4 ページ
-
APM 2723
5 ページ
-
APM 2377, UNS S31803
4 ページ
-
APM 2354, UNS S31603
3 ページ
-
APM 2327, UNS S32505
4 ページ
-
SANMAC 4571
10 ページ
-
Sanmac®329
2 ページ