Rapco Catalog 2017
1 / 100ページ

Rapco, Inc. 445 Cardinal Lane Hartland, Wl 53029 262.367.2292 phone 262.367.7158 fax www. rapcoinc. com For Reference Only. Please refer to individual FAA-PMA Supplements for Installation Eligibility

For Reference Only. Please refer to individual FAA-PMA Supplements for Installation Eligibility. For printing of individual sheets, this entire catalog is available online at www.rapcoinc.com 78 Master Cross Reference 445 Cardinal Lane Hartland, Wl 53029 262.367.2292 phone 262.367.7158 fax www. rapcoinc. com

Complete Pneumatics Application Guide New FAA-PMA Approved Dry Air Pumps, Filters, Regulators FAA Approved Overhauled Dry Air Pumps Section 1: Type Certified Aircraft Section 2: Kit Plane Vacuum System Kit By RAPCO - Replacement Parts Section 3: Dry Air Pump Cross Reference for Kit Plane and Experimental Aircraft Engines For reference only. For installation eligibility refer to the FAA-PMA Supplement. Some aircraft models or particular serial numbers may have applications other than those listed in this guide. Consult the appropriate aircraft parts catalogue, maintenance manual or equipment...

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. See Page 14-16 for complete Cross Reference.

REPLACEMENT AIRCRAFT PARTS CO. PNEUMATICS APPLICATIONS Section 3: Dry Air Pump Cross Reference for Kit Plane and Experimental - 2 gyro PNEUMATICS CROSS REFERENCE RAPCO Engine Manufacturer Manifold Check Valves All Airborne pumps available FAA Approved overhauled. For installation eligibility refer to FAA-PMA Supplement.

REPLACEMENT AIRCRAFT PARTS CO. PNEUMATICS CROSS REFERENCE Dry Air Pumps MISCELLANEOUS DRY AIR PUMP REPLACEMENT INFORMATION

REPLACEMENT AIRCRAFT PARTS CO. PNEUMATICS CROSS REFERENCE Filters

Dry Air Pump Rear End Identifiers (Not to scale)

Dry Air Pump Rear End Identifiers (Not to scale)

Dry Air Pump Rear End Identifiers (Not to scale)

NEW FAA PMA Approved Pneumatic Regulators RA2H3-2: 5/8” Hose (Pump), 1/2” Hose (Instrument) RA2H3-5: 5/8” Hose (Pump), 5/8” Hose (Instrument) RA2H3-6: 5/8” Hose (Pump), 5/8” Hose (Instrument) RA2H3-12 : 5/8” Hose (Pump), two 3/8” Hose (Instrument) RA2H3-19 : 5/8” Hose (Pump), two 3/8” Hose (Inst.) w/ Vac Switch RA2H3-23 : 5/8” Hose (Pump), two 3/8” Hose (Instrument) RA2H3-48 : AN-10A Fitting (Pump), 5/8” Hose (Inst.) 445 Cardinal Lane Hartland, Wisconsin 53029 USA For a list of Distributors, please call. (262) 367-2292 Phone (262) 367-71

Why choose a Rapco Pump? A. Inspection port allowing for on-aircraft measurement B. Chamfered rotor allowing for small foreign objects to pass C- Oil sea! to help prevent fluid contamination D. Mil-Spec coated cavity to reduce friction

Pneumatic Fittings FAA PMA Approved For Aircraft Pneumatic Instrument Systems • Smooth curve design minimizes loss of vacuum or pressure over standard AN or MS fittings. • Wide unrestricted passages help maintain flow rate at altitude. • Less restriction on the pneumatic system which increases dry air pump service life. RA1K1-6-10 Fitting, 90 degree, 3/8” NPT, 5/8” hose Fits 200 thru 242 series dry air pump inlet ports. Replaces - Airborne PN. 1K1-6-10 RA1K8-6-10 Fitting, 152 degree, 3/8” NPT, 5/8” hose Fits 200 thru 242 series dry air pump outlet ports. Replaces - Airborne PN. 1K8-6-10...

Pump Wrench TOOL FOR THE REMOVAL AND INSTALLATION OF DRY AIR VACUUM PUMPS Provides superior access to vacuum pump flange nuts. Quality hardened steel with corrosion resistant nickel plating. Shaped to provide easy access to tight areas between the pump and accessories. Plastic coated handle provides a firm grip. REPLACEMENT AIRCRAFT PARTS CO. 445 Cardinal Lane Hartland, Wisconsin 53029 USA For a list of Distributors, please call. (262) 367-2292 Phone (262) 367-7158 Fax www.rapcoinc.com

RAPVAC-K1: For use on engines with counterclockwise turning accessory drive RAPVAC-K2: For use on engines with clockwise turning accessory drive RAPVAC-K9: For use on Continental O-200-A thru -C engines 1 Suction guage 1 5/8” x 3’ Hose 1 RAP215CC or RAP216CW or RAP125CC-9 Vacuum Pump with Gasket 1 RA2H3-12 Vacuum Regulator with Garter Filter REPLACEMENT AIRCRAFT PARTS CO. 445 Cardinal Lane Hartland, Wisconsin 53029 USA For a list of Distributors, please call. (262) 367-2292 Phone (262) 367-7158 Fax www.rapcoinc.com

Replacement De-Ice Application Guide FAA-PMA Approved De-icer, Wire Harness, and Brush Replacement Parts for BFG and McCauley Propeller De-Ice Systems For reference only. For installation eligibility refer to the FAA-PMA Supplement. Some aircraft models or particular serial numbers may have applications other than those listed in this guide. Consult the appropriate aircraft parts catalogue, maintenance manual or equipment list when selecting a part for installation. To convert a BFG part number to a RAPCO part number replace the 2E, 3E or 4E with RA and add 100 to the number. To convert a...

RAPCOn Dt-iCt APPLICATION Aircraft Manufacturer and Model Notes Indicates an item not manufactured by RAPCO,Inc. , ** EASA Approved , On Boot means the lead is built into the boot.

uE-iCE AppLiCAiiON Aircraft Manufacturer and Model Notes * Indicates an item not manufactured by RAPCO,Inc. , ** EASA Approved , On Boot means the lead is built into the boot.