Carbide Straight Reamers
1 / 4ページ

PRODUCTS INFORMATION CARBIDE STRAIGHT REAMER 0.01とび サイズ追加 超硬リーマシリーズ 新登場 ！ New OSG Carbide Reamer Series! 超硬ストレー トリーマの特長 Features This reamer is made from carbide material that's both tough and highly resistant to wear. It can be used for a wide range of materials including carbon steels and hardened steels.

PRODUCTS INFORMATION TOOL COMMUNICATION Specification Chart 形状寸法表 超硬合金 Tungsten Carbide ●刃径許容差  Tolerance for  Diameter 超硬ス レー リ ト ト ーマ CARBIDE STRAIGHT REAMER Specification Chart of stock items 0.01とびサイズ追加 ！ New Sizes with 0.01mm increments ツールNo. （単位：mm） （Unit：mm）

PRODUCTS INFORMATION TOOL COMMUNICATION Cutting Data 切削データ The surface roughness and amount of over size in different cutting speed. 16  送り量  Feed  下穴径  Drill Hole Size  被削材質 S50C  Work Material          (JIS S50C,AISI 1050)  リ ーマサイ ズ  Reamer Size ●切削条件 Cutting Conditions  切削油剤 水溶性  Cutting Fluid          Water-Soluble Fluid 切削速度 （m/min） 切削速度 （m/min） 一回転あたりの送り量による面粗さ･拡大代の変化  The surface roughness and amount of over size in different feed rate per revolution. 一回転当たりの送り量と面粗さ ●切削条件 Cutting Conditions  切削速度  Drilling Speed  下穴径  Drill Hole Size  被削材質 S50C  Work Material          (JIS S50C,AISI...

PRODUCTS INFORMATION Recommended drilling conditionsCRM SffJW I.Apply the appropriate amount of cutting fluid. 2.Use a rigid and precision holder. 3.The cutting conditions may need to be changed, depending on the work material and machine rigidity. Safe use of cutting tools • Use safety cover, safety glasses and safety shoes during operation. • Do not touch cutting edges with bare hands. • Do not touch cutting chips with bare hands. Chips will be hot after cutting. •Stop cutting when the tool becomes dull. •Stop cutting operation immediately if you hear any strange cutting sounds. • Do not...