TTN600-1E17a
1 / 2ページ

TECHNICAL DATA SHEET TURBONYCOIL 600 SYNTHETIC AVIATION TURBINE OIL NATO CODE O-156 – MIL-PRF-23699 G Class STD – DCSEA 299/A DEF STAN 91-101 Iss.3, Amd. 1 – OX-27 / OX-28 SAE AS5780 Class SPC DESCRIPTION TURBONYCOIL 600 is a lubricating oil with a viscosity of 5 cSt at 100°C. It is based on high thermal stable polyol esters, fortified with carefully selected anti-oxidant, antiwear and anti-corrosion additives. TURBONYCOIL 600 features a much lower volatility at high temperature and a higher flash point than oils from competition. It possesses excellent resistance to foaming and demonstrates superior lubricity. Turbine oil (power plant, APU, starter, IDG, …) for aircraft and helicopters Helicopter systems Leak testing Test bench Ground gas turbine (aeroderivative) Off-shore installation TURBONYCOIL 600 is designed for use in gas turbine engines in military and civil aircrafts as well as in stationary industrial applications. TURBONYCOIL 600 is approved by all major engine manufacturers (General Electric, Pratt and Whitney, Allison, Rolls-Royce, Allied Signal, Snecma, Klimov, Turbomeca, PZL-Rzeszow) for use in more than 40 different military engines powering a wide range of combat, transport or surveillance aircrafts or helicopters.  CFM International  International Aero  General Electric       Honeywell Klimov Motor Sich Perm Motor Pratt & Whitney Pratt & Whitney Canada  Rolls Royce / Allison The values above are typical values. They do not constitute any contractual commitment. Sales specifications are available on request. The present technical data sheet replaces all the previous editions. NYCO - 66 avenue des Champs Elysées BP 414 - 75366 PARIS CEDEX 8 France | Tél. : +33 145 615 000 | Fax : +33 145 615 013 | E.mail : info@nyco.fr; aero@nyco.fr | www.nyco.fr TURBONYCOIL 600 is also approved for use on the following civ

NYCO AERONAUTICS & DEFENCE TECHNICAL DATA SHEET TURBONYCOIL 600 * Snecma M53, M88, Silvercrest... * Turbomeca All models Artouste, Astazou, Bastan, Arriel, Arrius, Makila, Larzac, Turmo, TM 319, TM 333, RTM 322, MTR 390 * Ratier Figeac / GE-Dowty Propellers * UTAS/Hamilton Sundstrand All IDG models TURBONYCOIL 600 is also approved for use on the following stationary industrial gas turbines: * General Electric all models (LM 2500, LM 6000, LMS 100,.) * Rolls-Royce / Allison Avon, RB211, Allison 501K, Olympus, Tyne, Spey, ... Turbonycoil 600 has logged over 60 million hours of...