カタログ >
KAPP NILES >
Generating grinding with small tools

Generating grinding with small tools
1 / 1ページ

カタログの抜粋

Generating grinding with small tools - 1

GENERATING GRINDING Up to now the hard finishing of gears with interfering geometry was primarily realised by discontinuous profile grinding or gear honing. Compared to continuous generating grinding of components free from interfering contours, both processes have distinct disadvantages in terms of productivity and cost-effectiveness. Until now, no gear grinding machine was able to process gears with interfering contours using the continuous generating grinding method due to the high dynamic demands placed on tool and workpiece drives. A new development from KAPP NILES is now closing that gap and offers great streamlining opportunities by using continuous genera ting grinding for optimising the hard finishing process of complex gears. By using a high-speed grinding spindle on the KX 160 / 260 TWIN machines, gears which require a tool diameter of 55 mm can now be processed with generating grinding. In connection with the maximum tool width of 160 mm, it is possible to achieve the quality standards, processing times and costs common to serial production that were previously considered impossible for gears with interfering contours. KAPP NILES • Callenberger Str. 52 • 96450 Coburg • Germany • Phone: +49 9561 866-0 • E-Mail: info@kapp-niles.com • Internet: www.kapp-niles.com

カタログの1ページ目を開く